Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Windshield Wiper
- 4 steps
Flags
0
BackInfiniti
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Windshield Wiper
- Go to the driver’s side windshield wiper.
- Pull the driver’s side windshield wiper away from the windshield.
Go to the driver’s side windshield wiper.
Pull the driver’s side windshield wiper away from the windshield.
1024
Step 2
- A tiny clip is holding the blade in place. Push the clip up towards the arm of the wiper and push up.
A tiny clip is holding the blade in place. Push the clip up towards the arm of the wiper and push up.
Step 3
- Completely disconnect the old blade by pushing it a few inches from the arm.
Completely disconnect the old blade by pushing it a few inches from the arm.
Step 4
- Position the new blade so the hook is toward the wiper clip.
- Place the hook over the top of the attachment and lock the blade into place by pulling it towards the end of the arm.
- Pressure should be applied so the blade can latch onto the hook.
Position the new blade so the hook is toward the wiper clip.
Place the hook over the top of the attachment and lock the blade into place by pulling it towards the end of the arm.
Pressure should be applied so the blade can latch onto the hook.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Marissa
Member since: 03/22/2021
133 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S3-G10, Saloman Spring 2021
Member of UMass Dartmouth, Team S3-G10, Saloman Spring 2021
UMASSD-SALOMAN-S21S3G10
1 Member
1 Guide authored
