Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Battery
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackToyota Highlander
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Note: You don’t have to buy a special kind of tweezers, you can just use one that you have at home as long as it fits into the notch.
What you need
Step 1
Battery
- Remove the key by pressing the button on the side.
- Make sure the red alarm button is face-up so that the button you need to press is on the left side of the plastic layer.
Remove the key by pressing the button on the side.
Make sure the red alarm button is face-up so that the button you need to press is on the left side of the plastic layer.
1024
Step 2
- Insert tweezers into the notch where the key was.
- You can use any kind of tweezer you have at home as long as it fits into the notch.
Insert tweezers into the notch where the key was.
You can use any kind of tweezer you have at home as long as it fits into the notch.
Step 3
- Apply a small amount of pressure to the tweezer, so you can use them to pop the plastic layer open.
Apply a small amount of pressure to the tweezer, so you can use them to pop the plastic layer open.
Step 4
- Check the front and back of the green circuit to locate the battery.
Check the front and back of the green circuit to locate the battery.
Step 5
- Using the pair of tweezers, remove the battery from the device.
Using the pair of tweezers, remove the battery from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Muhamad Razeq
Member since: 02/17/2021
121 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team S50-G8, Willis Spring 2021
Member of University of Memphis, Team S50-G8, Willis Spring 2021
UM-WILLIS-S21S50G8
1 Member
1 Guide authored