Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Key Fob Battery
- 5 steps
Flags
0
BackFord Mustang
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
When your key fob battery dies, you lose the ability to start your car, unlock and lock your doors, as well as automatically start your car on those cold mornings. Your car will alert you when your battery is running low, so you should have ample time to get to the store and purchase a replacement battery.
What you need
Step 1
Key Fob Battery
- Press down on the button to open the plastic notch.
- Remove the back plastic case of the key fob.
Press down on the button to open the plastic notch.
Remove the back plastic case of the key fob.
1024
Step 2
- Insert a prying tool or a quarter into the groove in the middle of the key fob.
- Apply pressure to lift up the middle section.
Insert a prying tool or a quarter into the groove in the middle of the key fob.
Apply pressure to lift up the middle section.
Step 3
- Lift up and remove the middle piece.
Lift up and remove the middle piece.
Step 4
- Lift up on the batteries to remove them.
- When inserting new batteries, follow the instructions on the white tag.
- Do not remove the white tag.
Lift up on the batteries to remove them.
When inserting new batteries, follow the instructions on the white tag.
Do not remove the white tag.
Step 5
- After you have replaced the batteries it should look like this.
After you have replaced the batteries it should look like this.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Lauren Underwood
Member since: 02/17/2021
121 Reputation
1 Guide authored
Badges:
2
Team
Texas Tech, Team S3-G16, Cowan Spring 2021
Member of Texas Tech, Team S3-G16, Cowan Spring 2021
TTU-COWAN-S21S3G16
1 Member
1 Guide authored