Difficulty

Easy

Steps

4

Time Required

                          3 minutes            

Sections

1

  • Key Fob Battery
  • 4 steps

Flags

0

  • BackMini

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Key Fob Battery               
  • Using a plastic opening tool, create leverage in the corner of the backplate.
  • Pry open the corner and move along the seam to the middle while twisting upwards to push the cover upwards.
  • Repeat on the other side.

Using a plastic opening tool, create leverage in the corner of the backplate.

Pry open the corner and move along the seam to the middle while twisting upwards to push the cover upwards.

Repeat on the other side.

1024

Step 2

  • Insert a plastic opening tool in the notch on the front of the key fob and pry up the backplate in the center until it pops off.
  • If you hear cracking, make sure both the corners are detached.

Insert a plastic opening tool in the notch on the front of the key fob and pry up the backplate in the center until it pops off.

If you hear cracking, make sure both the corners are detached.

Step 3

  • Press the silver button on the side of the neck, and pull the key out.
  • Insert the key into the latch on the back of the battery casing, above the slot where it comes out. Pull up and out.
  • If the backing doesn’t come out easily, take the key out and try again.

Press the silver button on the side of the neck, and pull the key out.

Insert the key into the latch on the back of the battery casing, above the slot where it comes out. Pull up and out.

If the backing doesn’t come out easily, take the key out and try again.

Step 4

  • Use your finger to press down and forward on the battery. It should pop out.

Use your finger to press down and forward on the battery. It should pop out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Nathaniel Stringer                     

Member since: 09/08/2021

124 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team 9-13, Rauch Fall 2021                        

                                                  Member of Embry-Riddle Aeronautical University, Team 9-13, Rauch Fall 2021 



                    ERAU-RAUCH-F21S9G13                     


                                            3 Members                     


                                            1 Guide authored