2016 2021 Chevrolet Camaro Brake Light Bulb Replacement 2016 2017 2018 2019 2020 2021 Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Brake/reverse light bulb
6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackChevrolet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Brake/reverse light bulb

Using either the button on your vehicle’s key fob, or the button on the driver’s side door, open the trunk.
Go to the rear of the vehicle and lift the rear trunk lid until it reaches its highest position and locks out.

Using either the button on your vehicle’s key fob, or the button on the driver’s side door, open the trunk.

Go to the rear of the vehicle and lift the rear trunk lid until it reaches its highest position and locks out.

1024

Step 2

Using a spudger, gently pry the covers for the pop-rivets out.
Remove the pop-rivets themselves by inserting a spudger underneath them and prying up.
There will be a gap for the head of the spudger on each pop-rivet.

Using a spudger, gently pry the covers for the pop-rivets out.

Remove the pop-rivets themselves by inserting a spudger underneath them and prying up.

There will be a gap for the head of the spudger on each pop-rivet.

Step 3

After the fastener caps have been removed, twist the knob on top of the cover counterclockwise to remove it.

After the fastener caps have been removed, twist the knob on top of the cover counterclockwise to remove it.

Step 4

With the housing assembly open, gently lift the housing cover from the taillight assembly and set it aside.

With the housing assembly open, gently lift the housing cover from the taillight assembly and set it aside.

Step 5

Locate the reverse bulb socket; it will be identifiable by a wire running from the back of the tail light.
Gently grab the reverse bulb socket with your pliers, then gently turn it counterclockwise for one-quarter of a rotation.

Locate the reverse bulb socket; it will be identifiable by a wire running from the back of the tail light.

Gently grab the reverse bulb socket with your pliers, then gently turn it counterclockwise for one-quarter of a rotation.

Step 6

Pull the socket out from the assembly, and pull out the old bulb.
Insert your new bulb by gently pressing it into the socket.
Handle the bulbs carefully, as they are made of glass and break very easily.

Pull the socket out from the assembly, and pull out the old bulb.

Insert your new bulb by gently pressing it into the socket.

Handle the bulbs carefully, as they are made of glass and break very easily.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Ethan Kriel

Member since: 09/08/2021

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Embry-Riddle Aeronautical University, Team 1-2, Rauch Fall 2021                        

                                                  Member of Embry-Riddle Aeronautical University, Team 1-2, Rauch Fall 2021 



                    ERAU-RAUCH-F21S1G2                     


                                            2 Members                     


                                            1 Guide authored

Better Introduction#

Introduction#

What you need#

Team#

Better Introduction

Introduction

What you need

Team