Difficulty
Easy
Steps
6
Time Required
3 minutes
Sections
1
- Sun Visor
- 6 steps
Flags
0
Back2012-2017 Toyota Camry
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
A sun visor is a component of an automobile located on the interior just above the windshield. They are responsible for shading the eyes of drivers and passengers from the glare of sunlight. For this reason, a sun visor should be replaced immediately if faulty to ensure the driver’s safety.
This guide will require you to use a drill. If you are not old enough to handle a power tool or do not know how to use power tools, I strongly recommend you use a screwdriver instead to keep you safe.
What you need
Step 1
Sun Visor
- Using your hands, remove the protective cap to make the sun visor screws visible.
Using your hands, remove the protective cap to make the sun visor screws visible.
1024
Step 2
- Use a Phillips #2 screwdriver or drill bit above the screws and align the drill bit to the head of the screw.
- Gently remove the screws from their position.
Use a Phillips #2 screwdriver or drill bit above the screws and align the drill bit to the head of the screw.
Gently remove the screws from their position.
Step 3
- Detach the sun visor once all screws have been removed.
Detach the sun visor once all screws have been removed.
Step 4
- Place and hold the new sun visor.
- Begin to drill in the same screws you removed in step 3.
- Note: You may need assistance from a second person.
Place and hold the new sun visor.
Begin to drill in the same screws you removed in step 3.
Note: You may need assistance from a second person.
Step 5
- Once the sun visor is secure, place the protective cap back on.
Once the sun visor is secure, place the protective cap back on.
Step 6
- Move the sun visor into different positions to verify proper installation.
- The sun visor should NOT feel weak or jiggle around.
Move the sun visor into different positions to verify proper installation.
The sun visor should NOT feel weak or jiggle around.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Angel Malta
Member since: 11/08/2022
277 Reputation
1 Guide authored
Badges:
2
Team
CSU Los Angeles, Team 3-82, Briggs Fall 2022
Member of CSU Los Angeles, Team 3-82, Briggs Fall 2022
CSULA-BRIGGS-F22S3G82
1 Member
1 Guide authored
