Difficulty

Moderate

Steps

8

Time Required

                          30 minutes

Sections

1

  • Headlight
  • 8 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHonda Accord

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Headlight
  • Pull the Hood Latch lever inside the car, located under the steering wheel.
  • Lift the hood while pressing up on the lever under the front of the hood.

Pull the Hood Latch lever inside the car, located under the steering wheel.

Lift the hood while pressing up on the lever under the front of the hood.

1024

Step 2

  • Lift up the hood prop rod and insert it into the hole on the underside of the hood.

Lift up the hood prop rod and insert it into the hole on the underside of the hood.

Step 3

  • Use a 1/4" ratcheting wrench and a 10mm socket to loosen the bolt on the negative terminal head.
  • Lift the terminal up off of the battery and place it to the side.

Use a 1/4" ratcheting wrench and a 10mm socket to loosen the bolt on the negative terminal head.

Lift the terminal up off of the battery and place it to the side.

Step 4

  • Use the clip remover tool to pry the clip up to remove it.

Use the clip remover tool to pry the clip up to remove it.

Step 5

  • Use a 1/4" ratcheting wrench and a 10mm socket to remove the three bolts.

Use a 1/4" ratcheting wrench and a 10mm socket to remove the three bolts.

Step 6

  • Use a 1/4" ratcheting wrench, a 6" extension and a 10mm socket to remove the last bolt.

Use a 1/4" ratcheting wrench, a 6" extension and a 10mm socket to remove the last bolt.

Step 7

  • Gently pull the headlight out.

Gently pull the headlight out.

Step 8

  • Press the tab on the connector and pull. Do this for all 4 connectors.

Press the tab on the connector and pull. Do this for all 4 connectors.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dennis Kravtsov

Member since: 10/07/2019

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team S2-G5, Munoz Fall 2019                        

                                                  Member of Eastern Washington University, Team S2-G5, Munoz Fall 2019 



                    EWU-MUNOZ-F19S2G5                     


                                            2 Members                     


                                            1 Guide authored