Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
1
- Clutch Drum
- 3 steps
Flags
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMakita Chain Saw EA4300FRDB (2017)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Clutch Drum
- Remove 2 nuts holding on the cover
Remove 2 nuts holding on the cover
1024
Step 2
- Remove four T27 torx screws, keep note of the different lengths the longer two in the front also hold the bumper spike.
Remove four T27 torx screws, keep note of the different lengths the longer two in the front also hold the bumper spike.
Step 3
- Remove the lock washer with a flathead screwdriver then release the chain brake to remove clutch drum.
- With the chain brake disengaged add your new clutch drum then reinstall the four T27 screws
- Add bar and chain then reinstall cover and 1/2 inch* flange nuts
Remove the lock washer with a flathead screwdriver then release the chain brake to remove clutch drum.
With the chain brake disengaged add your new clutch drum then reinstall the four T27 screws
Add bar and chain then reinstall cover and 1/2 inch* flange nuts
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Trevor A
Member since: 09/16/2021
1,186 Reputation
6 Guides authored
Badges:
8
+5 more badges