Difficulty
Easy
Steps
8
Time Required
7 - 10 minutes
Sections
1
- Windshield Wiper
- 8 steps
Flags
0
BackChevrolet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The guide covers how to take off the windshield wipers as well as how to reinstall the wipers. This is a truck so some may need to use a step stool in order to reach the wipers depending on how high your truck is raised.
This is a fairly easy task that only requires your hands to disassemble and reassemble.
Before you start this guide make sure your truck is off, parked, and on a flat surface just to ensure that you are completing this guide in a safe manner.
What you need
Step 1
Windshield Wiper
- Identify where the buttons are on the windshield wipers are.
- Once the buttons are identified make note of where they are located on both wipers because of the different sizes they are slightly different on each.
Identify where the buttons are on the windshield wipers are.
Once the buttons are identified make note of where they are located on both wipers because of the different sizes they are slightly different on each.
1024
Step 2
- Lift the drive side wiper up so that it is no longer touching the windshield.
- This allows you to have better access to the wipers.
Lift the drive side wiper up so that it is no longer touching the windshield.
This allows you to have better access to the wipers.
Step 3
- Disconnect the blade on the driver side by pushing the small button down in order to release the wiper.
Disconnect the blade on the driver side by pushing the small button down in order to release the wiper.
Step 4
- Slowly slide the wiper off of the wiper arm by pulling it back and away from the windshield.
- The wiper arm is like a hook so make sure that you completely unhook the metal piece from the wiper blade.
- Follow the direction of the arrows.
Slowly slide the wiper off of the wiper arm by pulling it back and away from the windshield.
The wiper arm is like a hook so make sure that you completely unhook the metal piece from the wiper blade.
Follow the direction of the arrows.
Step 5
- Repeat steps 1-4 on the passenger side wiper.
Repeat steps 1-4 on the passenger side wiper.
Step 6
- Grab the 22" wiper blade and position it on the wiper arm so that it is hooked into places as well as flush with the arm.
Grab the 22" wiper blade and position it on the wiper arm so that it is hooked into places as well as flush with the arm.
Step 7
- Pull the wiper blade down with your right hand and slowly push with your left onto the wiper arm until you hear it snap back into place.
- Make sure that the wiper is securely fastened and that it cannot be removed without pushing the button.
- Follow the direction of the arrow.
Pull the wiper blade down with your right hand and slowly push with your left onto the wiper arm until you hear it snap back into place.
Make sure that the wiper is securely fastened and that it cannot be removed without pushing the button.
Follow the direction of the arrow.
Step 8
- Repeat steps 6 and 7 on the passenger side wiper. Make sure you are using the 18" wiper for the passenger side replacement.
Repeat steps 6 and 7 on the passenger side wiper. Make sure you are using the 18" wiper for the passenger side replacement.
to reassemble your device, follow these instructions in reverse order
Cancel: I did not complete this guide.
Author
with 2 other contributors
Diana Miranda Montano
Member since: 08/26/2020
207 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Embry-Riddle Aeronautical University, Team S3-G14, Cromer Twal Fall 2020
Member of Embry-Riddle Aeronautical University, Team S3-G14, Cromer Twal Fall 2020
ERAU-CROMER TWAL-F20S3G14
1 Member
1 Guide authored
