Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Power cable cable
- 6 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackDexter 2100W corded angle grinder - 2100AG2-230.5
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Unplug
- Before starting, remember to disconnect the outlet from the mains.
Before starting, remember to disconnect the outlet from the mains.
1024
Step 2
- To begin, remove the side handle and the protective cover.
To begin, remove the side handle and the protective cover.
Step 3
- Unscrew the screws from the hull to have access to the inside
Unscrew the screws from the hull to have access to the inside
Step 4
- Unscrew the wires that connect the cable to the switch.
Unscrew the wires that connect the cable to the switch.
Step 5
- The screws on the switch.
- Make sure that no cable is pinched and that the cable sheath is properly reassembled.
The screws on the switch.
Make sure that no cable is pinched and that the cable sheath is properly reassembled.
Step 6
- Screw the screws to close the shell.
Screw the screws to close the shell.
Cancel: I did not complete this guide.
HelloMacOS is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
HelloMacOS
Author
with 1 other contributor
Céline Chemineau
Member since: 01/29/2020
16,042 Reputation
95 Guides authored
Badges:
11
+8 more badges
Team
Leroy Merlin
Member of Leroy Merlin
Community
36 Members
223 Guides authored