32 Hisense Led Tv Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          1 - 2 hours

Sections

Screen
10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackHisense 32H3C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

DO NOT plug the TV into power at any time during this process.
To begin, lay the TV screen-down on a smooth surface.
Unscrew the screws connecting both support legs to the TV.

DO NOT plug the TV into power at any time during this process.

To begin, lay the TV screen-down on a smooth surface.

Unscrew the screws connecting both support legs to the TV.

1024

Step 2

To begin removing the back plate, find and remove all 18 screws indicated with the Phillips screwdriver.
If the screws are difficult to find, remove any screws on the back plate that have an arrow pointing to them like in the second picture.
Once all of the screws are removed, carefully pop off the back plate without damaging any of the connected wires.

To begin removing the back plate, find and remove all 18 screws indicated with the Phillips screwdriver.

If the screws are difficult to find, remove any screws on the back plate that have an arrow pointing to them like in the second picture.

Once all of the screws are removed, carefully pop off the back plate without damaging any of the connected wires.

Step 3

Slide the power cord free from its metal framework.
After the power cord has been moved, remove the four screws keeping the housing in place. Once finished, remove the housing as well.

Slide the power cord free from its metal framework.

After the power cord has been moved, remove the four screws keeping the housing in place. Once finished, remove the housing as well.

Step 4

Remove the three silver screws connecting the circuit board to the rest of the TV that are circled in the picture using the Phillips screwdriver.
Remove the final silver screw, making sure to avoid disconnecting any of the wires that obscure it from view.

Remove the three silver screws connecting the circuit board to the rest of the TV that are circled in the picture using the Phillips screwdriver.

Remove the final silver screw, making sure to avoid disconnecting any of the wires that obscure it from view.

Step 5

Remove all of the 18 screws connecting the front frame to the back of the TV with the Torx screwdriver.

Remove all of the 18 screws connecting the front frame to the back of the TV with the Torx screwdriver.

Step 6

Once the screws are all removed, slide the flat-head screwdriver into the small gap between the front and back plates. Use the screwdriver to pry the plates apart and lift the back plate up.

Once the screws are all removed, slide the flat-head screwdriver into the small gap between the front and back plates. Use the screwdriver to pry the plates apart and lift the back plate up.

Step 7

Completely separate the back from the front and flip the back section over so that the screen is now on top.

Completely separate the back from the front and flip the back section over so that the screen is now on top.

Step 8

Find the cable pictured and detach the plastic film protecting the circuitry to which the cable is attached.
DO NOT detach both ends of the plastic. Only detach the end that is easily removed from its adhesive.

Find the cable pictured and detach the plastic film protecting the circuitry to which the cable is attached.

DO NOT detach both ends of the plastic. Only detach the end that is easily removed from its adhesive.

Step 9

After detaching the plastic, detach the wire connecting the screen to the rest of the TV.
Next, the circuitry needs to be removed from the TV itself. Lift the screen circuitry free from the adhesive and then lift the screen free from the back section of the TV.

After detaching the plastic, detach the wire connecting the screen to the rest of the TV.

Next, the circuitry needs to be removed from the TV itself. Lift the screen circuitry free from the adhesive and then lift the screen free from the back section of the TV.

Step 10

Now that the screen has been removed, take the new screen and attach its circuitry in the same place as the previous screen. After that, connect the cable from the rest of the TV to the screen’s port and it should be good to go!

Now that the screen has been removed, take the new screen and attach its circuitry in the same place as the previous screen. After that, connect the cable from the rest of the TV to the screen’s port and it should be good to go!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      21 other people completed this guide.

Author

                                      with 2 other contributors

                    Connor French

Member since: 09/29/2015

1,295 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 17-2, Green Fall 2015                        

                                                  Member of Cal Poly, Team 17-2, Green Fall 2015 



                    CPSU-GREEN-F15S17G2                     


                                            4 Members                     


                                            8 Guides authored

Arinah Arin - Dec 10, 2016

Where can I buy the replacement panel?

Alexis - Nov 27, 2017

Could you please post the panel code of this tv model (32H3C)? I guess it could be the same my hisense tv need . It could help me to find the right spare part.

Thx

H Te Tea - Mar 28, 2018

where can i buy Hisene LCD TV Screen pls?

Shaik Ahmed Khaleck - Jan 20, 2019

where do I buy a replacement screen for 32inch hisence smart tv

Solomon - Feb 9, 2019

How can I buy the 55inch screen. The straight TV not curve

Member-Contributed Guide#

Introduction#

What you need#

Team#

Member-Contributed Guide

Introduction

What you need

Team