3Dr Iris Plus Quadcopter Gimbal Removal Procedure Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          9 - 10 minutes            

Sections

1

• Gimbal
• 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• Back3DR Iris Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Gimbal               

• If your drone is equipped with it, remove the video transmitter.
• Disconnect all cables from the gimbal.
• If your drone has neither the gimbal or video transmitter, you can skip this step.

If your drone is equipped with it, remove the video transmitter.

Disconnect all cables from the gimbal.

If your drone has neither the gimbal or video transmitter, you can skip this step.

1024

Step 2

• Unscrew the 16 mm screw attaching the gimbal mount to the body of the drone using the 3 mm Hex screwdriver/key.

Unscrew the 16 mm screw attaching the gimbal mount to the body of the drone using the 3 mm Hex screwdriver/key.

Step 3

• Rotate the drone 180 degrees.
• Unscrew the other 16mm gimbal mount screw using the 3 mm Hex screwdriver/key.

Rotate the drone 180 degrees.

Unscrew the other 16mm gimbal mount screw using the 3 mm Hex screwdriver/key.

Step 4

• Remove the gimbal mount from the body of the drone.

Remove the gimbal mount from the body of the drone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Evan Witulski                     

Member since: 02/10/2020

349 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S7-G5, Regan Winter 2020                        

                                                  Member of Cal Poly, Team S7-G5, Regan Winter 2020 



                    CPSU-REGAN-W20S7G5                     


                                            5 Members                     


                                            9 Guides authored