Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
1
- Projector Lamp
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Back3M SCP176 DLP Projector
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove the lamp
- Remove the 2 screws holding the lamp cover on. Then remove the cover. There are 2 screws on the lamp with arrows pointing towards them. You can loosen those screws and lift the lamp straight out of the projector.
Remove the 2 screws holding the lamp cover on. Then remove the cover. There are 2 screws on the lamp with arrows pointing towards them. You can loosen those screws and lift the lamp straight out of the projector.
1024
Step 2
Lamp Info
- The lamp is an Osram P-VIP 180-230W/10 E20.6, according to markings on the lamp.
- Fore more info, please visit the teardown of this projector model.
The lamp is an Osram P-VIP 180-230W/10 E20.6, according to markings on the lamp.
Fore more info, please visit the teardown of this projector model.
Step 3
Install the lamp
- Push the lamp down into the projector. Then tighten the 2 screws on the lamp and reinstall the cover the same way you removed it.
Push the lamp down into the projector. Then tighten the 2 screws on the lamp and reinstall the cover the same way you removed it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
nerdbug96
Member since: 06/17/2021
1,462 Reputation
8 Guides authored
Badges:
7
+4 more badges