Difficulty

Moderate

Steps

5

Time Required

                          15 - 20 minutes

Sections

2

  • Cover
  • 3 steps
  • Battery
  • 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • Back4Sight 9

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cover
  • Place the tablet on its side so that the two screws are facing upward.
  • Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

Place the tablet on its side so that the two screws are facing upward.

Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

1024

Step 2

  • Pry the case away from the device slowly by sliding a plastic opening tool along the device.
  • Once loosened, use your hands to separate the case from the device.

Pry the case away from the device slowly by sliding a plastic opening tool along the device.

Once loosened, use your hands to separate the case from the device.

Step 3

  • Hold the positive and negative wires as close as possible to the speaker.
  • Use an opening tool and fingers to simultaneously lift the speaker from the cover.

Hold the positive and negative wires as close as possible to the speaker.

Use an opening tool and fingers to simultaneously lift the speaker from the cover.

Step 4

              Battery
  • Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.
  • For a complete guide on how to solder, click here.

Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.

For a complete guide on how to solder, click here.

Step 5

  • Insert plastic prying tool under upper-hand corner of battery and slide back and forth.
  • Once loosened, insert plastic prying tool under lower-hand corner and repeat sliding action.
  • Repeat previous actions until battery comes loose from device.

Insert plastic prying tool under upper-hand corner of battery and slide back and forth.

Once loosened, insert plastic prying tool under lower-hand corner and repeat sliding action.

Repeat previous actions until battery comes loose from device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jack Applegate

Member since: 04/07/2015

389 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Eastern Washington University, Team 1-2, Plummer Spring 2015                        

                                                  Member of Eastern Washington University, Team 1-2, Plummer Spring 2015 



                    EWU-PLUMMER-S15S1G2                     


                                            4 Members                     


                                            10 Guides authored