Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

    1. Belt Tensioner Assembly
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBLV MGN Cube

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Printed parts needed:

None

What you need

Step 1

              Left Tensioner Assembly
  • Insert the Left Tensioner slide into the Left Bottom Tensioner mount.
  • Insert M4 hex head screw through the Left Tensioner slide.
  • Make the bearing assembly with 3x M3 washers and 2x F623ZZ bearings.

Insert the Left Tensioner slide into the Left Bottom Tensioner mount.

Insert M4 hex head screw through the Left Tensioner slide.

Make the bearing assembly with 3x M3 washers and 2x F623ZZ bearings.

1024

Step 2

              Left Tensioner Assembly
  • Insert a M3x18 button head screw to secure the bearing assembly to the tensioner slide.
  • Thread the tensioner knob on to the M4 hex head screw
  • Thread the Left Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely

Insert a M3x18 button head screw to secure the bearing assembly to the tensioner slide.

Thread the tensioner knob on to the M4 hex head screw

Thread the Left Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely

Step 3

              Left Tensioner Assembly
  • Mount the assembly to the left top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws
  • Tighten the M3x18 button head screws
  • Secure the bottom of the tensioner to the underside of the 2040 with a M5x8 button head screw and M5 T-Nut

Mount the assembly to the left top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws

Tighten the M3x18 button head screws

Secure the bottom of the tensioner to the underside of the 2040 with a M5x8 button head screw and M5 T-Nut

Step 4

              Right Tensioner Assembly
  • Insert the Right Tensioner slide into the Right Bottom Tensioner mount.
  • Insert M4 hex head screw through the Right Tensioner slide.
  • Make the bearing assembly with 3x M3 washers and 2x F623ZZ bearings.
  • Insert a M3x18 button head screw to secure the bearing assembly to the tensioner slide.

Insert the Right Tensioner slide into the Right Bottom Tensioner mount.

Insert M4 hex head screw through the Right Tensioner slide.

Step 5

              Right Tensioner Assembly
  • Thread the tensioner knob on to the M4 hex head screw
  • Thread the Right Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely
  • Mount the assembly to the right top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws.
  • Tighten the M3x18 button head screws

Thread the Right Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely

Mount the assembly to the right top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws.

I wasn’t paid to write these guides. Ben asked me to do it as a favor to him. Considering all that he’s done for our community I felt it was the least I could do. To be honest even though it took about 2 months to build and document, I had a lot of fun doing it. It forced me to write guides in a manner that was easy for everyone to understand and cleanup my Github so I could share any files that were used that aren’t part of the original download. You’re not obligated but if you would like, feel free to donate.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 1 other contributor 


                    David Husolo

Member since: 06/16/2021

7,245 Reputation

                                      28 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges