8Bitdo Sn30 Pro Disassembly Repair Guide

Difficulty

Very easy

Steps

2

Time Required

                          10 minutes            

Sections

1

• 8BitDo SN30 Pro+ Disassembly
• 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• Back8BitDo SN30 Pro Plus Gamepad

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove battery and triggers               

• By pushing with your thumbs, remove the cap from both triggers.
• remove the battery

By pushing with your thumbs, remove the cap from both triggers.

remove the battery

1024

Step 2

              Open the pad               

• Locate the four screws
• Two are located at the end of handles
• Two are hidden by the label behing the battery
• Remove the four T6 Torx screws
• Carefully unclip both sides. It’s quite easy and requires no additional tools.
• Separate the two sides, paying attention to the flex cable.

Locate the four screws

Two are located at the end of handles

Two are hidden by the label behing the battery

Remove the four T6 Torx screws

Carefully unclip both sides. It’s quite easy and requires no additional tools.

Separate the two sides, paying attention to the flex cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Maxence Laurent                     

Member since: 04/14/2020

305 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Dave Brave - Oct 12, 2021

Reply

It was an okey guide but the description of how to open the clips after unscrewing was very vague and I had no clue there these clips where and when open I notice three clips. One in between the joysticks and two underneath L & R buttons. Also I needed a flat screwdriver to open them up.