Difficulty
Difficult
Steps
5
Time Required
15 - 20 minutes
Sections
1
- Speakers
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackAarp RealPad MA7BX2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Speakers
- Loosen the back cover using the suction cup.
- Pull up on all four corners of the back with the suction cup.
Loosen the back cover using the suction cup.
Pull up on all four corners of the back with the suction cup.
1024
Step 2
- Gently place the small opening tool in the crevice created by loosening the back.
- Slide the opening tool around the edges of the device.
- Wedge it open using the plastic opening tool.
Gently place the small opening tool in the crevice created by loosening the back.
Slide the opening tool around the edges of the device.
Wedge it open using the plastic opening tool.
Step 3
- Gently pull off the black tape.
Gently pull off the black tape.
Step 4
- Remove the wires with the tweezers by pulling them upward.
Remove the wires with the tweezers by pulling them upward.
Step 5
- Pull the speakers upward with you hand.
Pull the speakers upward with you hand.
To reassemble your device you will need to solder the wires back in position and then follow the other steps in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Jordan Alonso
Member since: 09/18/2018
121 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
University of North Texas, Team S4-G7, Raign Fall 2018
Member of University of North Texas, Team S4-G7, Raign Fall 2018
UNT-RAIGN-F18S4G7
5 Members
4 Guides authored
