Abu Garcia Bait Caster Reel Disassembly Repair Guide

Difficulty

Easy

Steps

6

Time Required

Suggest a time??

Sections

1

• Abu Garcia Bait-Caster Reel Disassembly
• 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAbu Garcia Bait-Caster Reel

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Step 1               

• Use a small Phillips or flathead screwdriver to remove the screw highlighted in red.
• After screw is removed, remove the black cover highlighted in yellow.

Use a small Phillips or flathead screwdriver to remove the screw highlighted in red.

After screw is removed, remove the black cover highlighted in yellow.

1024

Step 2

              Step 2               

• Remove 10MM nut, highlighted in orange, on handle with a 10MM nut driver.
• Once nut is removed, then simple pull handle off.

Remove 10MM nut, highlighted in orange, on handle with a 10MM nut driver.

Once nut is removed, then simple pull handle off.

Step 3

              Step 3               

• Remove the side plate that is highlighted in blue.
• Be careful not loose inner yoke springs, as they may fall out.

Remove the side plate that is highlighted in blue.

Be careful not loose inner yoke springs, as they may fall out.

Step 4

              Step 4               

• Using a small Phillips or flathead screwdriver, remove the small screws that are highlighted in red.
• Once screws are removed, simply pull off side place in order to access the inner gears.

Using a small Phillips or flathead screwdriver, remove the small screws that are highlighted in red.

Once screws are removed, simply pull off side place in order to access the inner gears.

Step 5

              Step 5               

• After small screws are removed, twist each knob until they come off being careful not to loose these pieces.

After small screws are removed, twist each knob until they come off being careful not to loose these pieces.

Step 6

              Step 6               

• Once cover is released from reel, apply the Abu Garcia lube to the gears highlighted in orange.

Once cover is released from reel, apply the Abu Garcia lube to the gears highlighted in orange.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Grant Mathis                     

Member since: 07/27/2017

155 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge