Featured
Featured Guide
Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Stand
- 3 steps
Flags
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackAcer AL1916
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Stand
- Lay the monitor on a flat surface so that the back is facing up.
Lay the monitor on a flat surface so that the back is facing up.
1024
Step 2
- Grab the hinge cover with both hands on either side of the stand.
- Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.
Grab the hinge cover with both hands on either side of the stand.
Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.
Step 3
- Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.
- Support the monitor while removing the screws to prevent the monitor from falling.
- Lift up to detach the stand.
Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.
Support the monitor while removing the screws to prevent the monitor from falling.
Lift up to detach the stand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 6 other contributors
Keith
Member since: 10/06/2011
321 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 20-26, Maness Fall 2011
Member of Cal Poly, Team 20-26, Maness Fall 2011
CPSU-MANESS-F11S20G26
4 Members
7 Guides authored
GREG HILL - Sep 18, 2019
Reply
Worked great…never would have guessed how to do it. Thanks.
