Difficulty

Moderate

Steps

10

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 7 steps

Flags

0

  • BackAcer Aspire 3000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Begin with the device face down.
  • Orient the laptop so that the battery is on the side opposite of you and the headphone ports are facing towards you.

Begin with the device face down.

Orient the laptop so that the battery is on the side opposite of you and the headphone ports are facing towards you.

1024

Step 2

  • Slide the button found below the battery to the left into the unlocked position.
  • You will know the battery is unlocked if the tab is pushed to the side where the symbol is unlocked.

Slide the button found below the battery to the left into the unlocked position.

You will know the battery is unlocked if the tab is pushed to the side where the symbol is unlocked.

Step 3

  • Locate the battery and the tab to the right of it.
  • Pull the tab to the right while simultaneously pushing the battery away from you.
  • Make sure you push the battery only when tab is held in the right position in order to avoid damage to the device.

Locate the battery and the tab to the right of it.

Pull the tab to the right while simultaneously pushing the battery away from you.

Make sure you push the battery only when tab is held in the right position in order to avoid damage to the device.

Step 4

              RAM
  • Unscrew the two 4.6 mm Phillips #1 screws found at the bottom of the RAM cover using the phillips head j1 bit.

Unscrew the two 4.6 mm Phillips #1 screws found at the bottom of the RAM cover using the phillips head j1 bit.

Step 5

  • Open the RAM cover by wedging the opening tool and the metal spudger in the opening between the two screws.

Open the RAM cover by wedging the opening tool and the metal spudger in the opening between the two screws.

Step 6

  • Slide the opening tool around the sides of the cover to release the 3 tabs that hold the cover down.

Slide the opening tool around the sides of the cover to release the 3 tabs that hold the cover down.

Step 7

  • Lift and pull the cover back towards you to detach it from the device.

Lift and pull the cover back towards you to detach it from the device.

Step 8

  • Push the white tabs on either side away from the from the chip.
  • The chip should be released upward automatically after pushing the tabs.

Push the white tabs on either side away from the from the chip.

The chip should be released upward automatically after pushing the tabs.

Step 9

  • Pull and lift the chip to release it from the RAM port.

Pull and lift the chip to release it from the RAM port.

Step 10

  • Repeat step 9 to release the bottom chip from its RAM port.

Repeat step 9 to release the bottom chip from its RAM port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    roro6730

Member since: 10/30/2016

351 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Baylor, Team 4-2, Williams Fall 2016                        

                                                  Member of Baylor, Team 4-2, Williams Fall 2016 



                    BU-WILLIAMS-F16S4G2                     


                                            4 Members                     


                                            7 Guides authored