Difficulty

Moderate

Steps

9

Time Required

                          15 - 30 minutes

Sections

2

  • Battery
  • 3 steps
  • Wireless Card
  • 6 steps

Flags

0

  • BackAcer Aspire 3000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Begin with the device face down.
  • Orient the laptop so that the battery is on the side opposite of you and the headphone ports are facing towards you.

Begin with the device face down.

Orient the laptop so that the battery is on the side opposite of you and the headphone ports are facing towards you.

1024

Step 2

  • Slide the button found below the battery to the left into the unlocked position.
  • You will know the battery is unlocked if the tab is pushed to the side where the symbol is unlocked.

Slide the button found below the battery to the left into the unlocked position.

You will know the battery is unlocked if the tab is pushed to the side where the symbol is unlocked.

Step 3

  • Locate the battery and the tab to the right of it.
  • Pull the tab to the right while simultaneously pushing the battery away from you.
  • Make sure you push the battery only when tab is held in the right position in order to avoid damage to the device.

Locate the battery and the tab to the right of it.

Pull the tab to the right while simultaneously pushing the battery away from you.

Make sure you push the battery only when tab is held in the right position in order to avoid damage to the device.

Step 4

              Wireless Card
  • Remove the two 4.6 mm Phillips #1 screws on the lower edge of the laptop case.

Remove the two 4.6 mm Phillips #1 screws on the lower edge of the laptop case.

Step 5

  • Pop the three side tabs out of the back case.

Pop the three side tabs out of the back case.

Step 6

  • Remove the panel that covers the graphics card.

Remove the panel that covers the graphics card.

Step 7

  • Remove the black and white cables attached to the graphics card.
  • Be careful to lift vertically as to not mess up either part of the connectors.

Remove the black and white cables attached to the graphics card.

Be careful to lift vertically as to not mess up either part of the connectors.

Step 8

  • Push the white flanges on either side of the graphics card out.
  • The card should lift on its own slightly out of the case.

Push the white flanges on either side of the graphics card out.

The card should lift on its own slightly out of the case.

Step 9

  • Remove the card by lifting up and away from the edge that has all of the contacts on it.

Remove the card by lifting up and away from the edge that has all of the contacts on it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Lykia Harper

Member since: 10/29/2016

258 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Baylor, Team 4-2, Williams Fall 2016                        

                                                  Member of Baylor, Team 4-2, Williams Fall 2016 



                    BU-WILLIAMS-F16S4G2                     


                                            4 Members                     


                                            7 Guides authored