Acer Aspire 3410 Screen Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          1 hour            

Sections

1

• Screen
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Aspire 3410

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Unscrewing bottom lid               

• Remove the battery
• Turn the laptop so that the lid touches the table and unscrew the screws. There are 14 long ones and 2 short ones.

Remove the battery

Turn the laptop so that the lid touches the table and unscrew the screws. There are 14 long ones and 2 short ones.

1024

Step 2

              Unscrew Upper Lid               

• Pop up the keyboard with a flat screw driver. Pay attention to the connector between the keyboard and the mother board.
• Disconnect the keyboard from the motherboard by lifting the black part of the FPC connector.
• Unscrew 8 screws.

Pop up the keyboard with a flat screw driver. Pay attention to the connector between the keyboard and the mother board.

Disconnect the keyboard from the motherboard by lifting the black part of the FPC connector.

Unscrew 8 screws.

Step 3

              Disconnect Upper Lid               

• Disconnect the two flat cables with the FPC connectors as shown in the picture.
• Detach the lid and disconnect the sound card reader (red/black cable pair).

Disconnect the two flat cables with the FPC connectors as shown in the picture.

Detach the lid and disconnect the sound card reader (red/black cable pair).

Step 4

              Unscrew Screen Lid               

• Unscrew the four screw in the screen lid.
• Slide out the 4 lockers on the side of the screen. Be careful not to have the screen touch the motherboard as it might scratch the surface of the screen.

Unscrew the four screw in the screen lid.

Slide out the 4 lockers on the side of the screen. Be careful not to have the screen touch the motherboard as it might scratch the surface of the screen.

Step 5

• Disconnect the screen from the motherboard.
• Connect the new screen and make sure to tape the cable to the screen (the connector should have a tape, if not, add one).

Disconnect the screen from the motherboard.

Connect the new screen and make sure to tape the cable to the screen (the connector should have a tape, if not, add one).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    contact@kbl.netlib.re                     

Member since: 09/27/2018

395 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges