Acer Aspire 4520 5464 Wifi Wireless Card Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Battery
• 3 steps
• WiFi Wireless Card
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackAcer Aspire 4520-5464

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Shut down the computer and disconnect all external devices and cables.
• Flip the computer over.

Shut down the computer and disconnect all external devices and cables.

Flip the computer over.

1024

Step 2

• Ensure that the battery compartment lock tab is in the unlocked position.
• Slide the sliding black tab away from the battery compartment.
• The inside edge of the battery should be released, causing it to slightly pop out of the compartment.

Ensure that the battery compartment lock tab is in the unlocked position.

Slide the sliding black tab away from the battery compartment.

The inside edge of the battery should be released, causing it to slightly pop out of the compartment.

Step 3

• Grasp the inside edge of the battery and lift to fully detach the battery from the computer.

Grasp the inside edge of the battery and lift to fully detach the battery from the computer.

Step 4

              WiFi Wireless Card               

• Using the Phillips #1 screwdriver, remove the two 0.5mm screws from the smallest panel on the back of the computer.
• Set the screws aside.
• Lift up the panel using the indent located on the left side of the panel.

Using the Phillips #1 screwdriver, remove the two 0.5mm screws from the smallest panel on the back of the computer.

Set the screws aside.

Lift up the panel using the indent located on the left side of the panel.

Step 5

• Remove both the black and white wires by pinching the brass connectors and pulling up.

Remove both the black and white wires by pinching the brass connectors and pulling up.

Step 6

• Remove the two 0.5mm Phillips #1 black screws located on the WiFi card.

Remove the two 0.5mm Phillips #1 black screws located on the WiFi card.

Step 7

• Lift the WiFi card on the left side to remove it.

Lift the WiFi card on the left side to remove it.

To reassemble your device, follow these instructions in reverse order with a new WiFi wireless card.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Byeloth Hermanson                     

Member since: 09/21/2017

279 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Washington State, Team S5-G117, Phelps-Hillen Fall 2017                        

                                                  Member of Washington State, Team S5-G117, Phelps-Hillen Fall 2017 



                    WSU-PHELPS-HILLEN-F17S5G117                     


                                            3 Members                     


                                            7 Guides authored