Difficulty

Moderate

Steps

4

Time Required

                          15 minutes

Sections

1

  • Screen
  • 4 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAcer Aspire 4741G-332G32Mn

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The screen transmits visual data to users through thousands of small pixels. A faulty screen will transmit distorted or unclear images or no images at all.

Before using this guide, inspect the screen for any debris that may be interfering with screen quality. Typically, a small buildup of dust can be removed using an ESD-safe brush or small, damp towel. Be sure to completely shut down your laptop on and off at least two times to confirm that the faulty hardware is the screen itself.

Before beginning, make sure to power off your laptop completely and disconnect the device from any external power source(s) or monitors if possible.

What you need

Step 1

              Screen
  • Push the blue opening tool between the edge of the computer and the screen. Slide the tool around the perimeter of the screen.

Push the blue opening tool between the edge of the computer and the screen. Slide the tool around the perimeter of the screen.

1024

Step 2

  • Pop the two circle screw caps off and remove the two screws using a Phillips #0 screwdriver.
  • Remove the computer’s frame.

Pop the two circle screw caps off and remove the two screws using a Phillips #0 screwdriver.

Remove the computer’s frame.

Step 3

  • Remove the six screws from the four corners of the screen using a Phillips #0 screwdriver.

Remove the six screws from the four corners of the screen using a Phillips #0 screwdriver.

Step 4

  • Remove the screws from along the sides of the screen (two on each side) using the Phillips #0 screwdriver.
  • Remove the screen adapter from the screen.
  • Remove the screen from the rest of the laptop.

Remove the screws from along the sides of the screen (two on each side) using the Phillips #0 screwdriver.

Remove the screen adapter from the screen.

Remove the screen from the rest of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    kristen

Member since: 03/21/2019

364 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S2-G6, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G6, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S2G6                     


                                            4 Members                     


                                            8 Guides authored