Acer Aspire 5251 1513 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 - 35 minutes

Sections

Battery
4 steps
Display Assembly
19 steps

Flags

BackAcer Aspire 5251-1513
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn over the laptop so the back is facing up.

Turn over the laptop so the back is facing up.

1024

Step 2

Next to the battery is a switch with a lock symbol on it.
Unlock the switch by sliding it to reveal a red unlock symbol.

Next to the battery is a switch with a lock symbol on it.

Unlock the switch by sliding it to reveal a red unlock symbol.

Step 3

Pull the other switch completely while the red unlock symbol is still present. The battery pack should pop up a bit.

Pull the other switch completely while the red unlock symbol is still present. The battery pack should pop up a bit.

Step 4

Remove the battery pack via the indentation at the top of the battery in between the two switches.

Remove the battery pack via the indentation at the top of the battery in between the two switches.

Step 5

              Display Assembly

Unscrew the 8.6 mm screws on the back panel with a Phillips #0 screwdriver.

Unscrew the 8.6 mm screws on the back panel with a Phillips #0 screwdriver.

Step 6

Using a plastic opening tool, lift up the panel and remove it completely.

Using a plastic opening tool, lift up the panel and remove it completely.

Step 7

Flip the laptop over as shown.
Locate the six tabs keeping the keyboard in place.

Flip the laptop over as shown.

Locate the six tabs keeping the keyboard in place.

Step 8

Pull on the edge of the keyboard using a spudger or your hands.
As you pull on the keyboard, push the tabs in one by one using small tweezers.

Pull on the edge of the keyboard using a spudger or your hands.

As you pull on the keyboard, push the tabs in one by one using small tweezers.

Step 9

Once you pop it out and its separated, slowly turn it over to reveal its attachment to the connector.
Do not pull the keyboard out too hard because you risk damaging both the connector and the laptop.

Once you pop it out and its separated, slowly turn it over to reveal its attachment to the connector.

Do not pull the keyboard out too hard because you risk damaging both the connector and the laptop.

Step 10

Using tweezers, slide the the tab down. This will release the connector that you can gently pull out of the socket.
If it does not come out easily, then you did not release it with the tabs and you risk ripping the connector.

Using tweezers, slide the the tab down. This will release the connector that you can gently pull out of the socket.

If it does not come out easily, then you did not release it with the tabs and you risk ripping the connector.

Step 11

Once freed, remove the keyboard entirely and put it aside.

Once freed, remove the keyboard entirely and put it aside.

Step 12

Flip the computer gently so that the back is facing you.
Remove all 12 of the 7.6 mm screws on the backside with a Phillips #0 screwdriver.
Remove 4 of the 5.4 mm screws on the backside with a Phillips #00 screwdriver.

Flip the computer gently so that the back is facing you.

Remove all 12 of the 7.6 mm screws on the backside with a Phillips #0 screwdriver.

Remove 4 of the 5.4 mm screws on the backside with a Phillips #00 screwdriver.

Step 13

Flip the computer back over.
Unscrew the seven 5.6 mm screws located on the top cover using a Phillips #0 screwdriver.

Flip the computer back over.

Unscrew the seven 5.6 mm screws located on the top cover using a Phillips #0 screwdriver.

Step 14

Locate the 4 connectors that must also be disconnected.

Locate the 4 connectors that must also be disconnected.

Step 15

For the Power button cable and touchpad cable, please disconnect the connector using tweezers to pull down the brown tabs.
For the smaller right and left speaker cables, pull out the black tab completely also using tweezers.

For the Power button cable and touchpad cable, please disconnect the connector using tweezers to pull down the brown tabs.

For the smaller right and left speaker cables, pull out the black tab completely also using tweezers.

Step 16

Using a plastic spudger or your hands, carefully lift up the corner of the top panel.
Continue to lift the panel until it is removed completely.

Using a plastic spudger or your hands, carefully lift up the corner of the top panel.

Continue to lift the panel until it is removed completely.

Step 17

Locate the video cable connector keeping the screen connected to the motherboard.

Locate the video cable connector keeping the screen connected to the motherboard.

Step 18

Unscrew the 8.6 mm bottom screws on the both hinges to separate the screen from the rest.
The computer is still connected to the backside of the motherboard so do not yank it off completely.

Unscrew the 8.6 mm bottom screws on the both hinges to separate the screen from the rest.

The computer is still connected to the backside of the motherboard so do not yank it off completely.

Step 19

Remove the circle sticker and unscrew the 6.7 mm screws with a Phillips #0 screwdriver.

Remove the circle sticker and unscrew the 6.7 mm screws with a Phillips #0 screwdriver.

Step 20

Peel back the screen carefully using a plastic spudger or your hands.

Peel back the screen carefully using a plastic spudger or your hands.

Step 21

Using a Phillips #0 screwdriver, remove all six 3.6mm screws on the sides of the screen.

Using a Phillips #0 screwdriver, remove all six 3.6mm screws on the sides of the screen.

Step 22

Disconnect the webcam connector by gently pulling on the tabs using your hands or tweezers.

Disconnect the webcam connector by gently pulling on the tabs using your hands or tweezers.

Step 23

Remove the screen completely.

Remove the screen completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Gicely Rodriguez

Member since: 02/14/2019

1,005 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S1-G6, Leahy Spring 2019                        

                                                  Member of USF Tampa, Team S1-G6, Leahy Spring 2019 



                    USFT-LEAHY-S19S1G6                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team