Difficulty

Easy

Steps

8

Time Required

                          3 - 5 minutes

Sections

2

  • Battery
  • 4 steps
  • Hard Drive
  • 4 steps

Flags

0

  • BackAcer Aspire 5251-1513

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn over the laptop so the back is facing up.

Turn over the laptop so the back is facing up.

1024

Step 2

  • Next to the battery is a switch with a lock symbol on it.
  • Unlock the switch by sliding it to reveal a red unlock symbol.

Next to the battery is a switch with a lock symbol on it.

Unlock the switch by sliding it to reveal a red unlock symbol.

Step 3

  • Pull the other switch completely while the red unlock symbol is still present. The battery pack should pop up a bit.

Pull the other switch completely while the red unlock symbol is still present. The battery pack should pop up a bit.

Step 4

  • Remove the battery pack via the indentation at the top of the battery in between the two switches.

Remove the battery pack via the indentation at the top of the battery in between the two switches.

Step 5

              Hard Drive
  • Unscrew the two 8.6 mm screws using a Phillips #0 screwdriver.

Unscrew the two 8.6 mm screws using a Phillips #0 screwdriver.

Step 6

  • Use a spudger or plastic opening tool to lift the panel up. Then remove the panel entirely with your hands.

Use a spudger or plastic opening tool to lift the panel up. Then remove the panel entirely with your hands.

Step 7

  • Slide the hard drive to the left until it clicks and then pull it out completely.

Slide the hard drive to the left until it clicks and then pull it out completely.

Step 8

  • Unscrew the four 3.6 mm screws on either side of the casing with the Phillips #0 screwdriver.
  • Remove the hard drive out of its casing.
  • Be Gentle with the hard rive, only touch the edges.

Unscrew the four 3.6 mm screws on either side of the casing with the Phillips #0 screwdriver.

Remove the hard drive out of its casing.

Be Gentle with the hard rive, only touch the edges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Gicely Rodriguez

Member since: 02/14/2019

1,005 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S1-G6, Leahy Spring 2019                        

                                                  Member of USF Tampa, Team S1-G6, Leahy Spring 2019 



                    USFT-LEAHY-S19S1G6                     


                                            4 Members                     


                                            5 Guides authored