Difficulty

Easy

Steps

9

Time Required

                          2 - 5 minutes

Sections

2

  • Battery
  • 5 steps
  • Back Cover Panel
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAcer Aspire 5253

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn the laptop over.

Turn the laptop over.

1024

Step 2

  • “Unlock” your battery by moving the switch as shown so that an unlocked lock on a red background is shown.

“Unlock” your battery by moving the switch as shown so that an unlocked lock on a red background is shown.

Step 3

  • Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop.

Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop.

Step 4

  • Now remove the battery by lifting it out of the laptop by the side closest to the switches.

Now remove the battery by lifting it out of the laptop by the side closest to the switches.

Step 5

  • You have successfully removed the battery. Congratulations!

You have successfully removed the battery. Congratulations!

Step 6

              Back Cover Panel
  • Now, locate the two screws that hold the back cover panel onto the laptop.

Now, locate the two screws that hold the back cover panel onto the laptop.

Step 7

  • Unscrew both of the screws that are holding the back panel in place with the Philips #00 head.
  • The screws are 3/8" in length and have a 1/4" head.

Unscrew both of the screws that are holding the back panel in place with the Philips #00 head.

The screws are 3/8" in length and have a 1/4" head.

Step 8

  • Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there.

Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there.

Step 9

  • After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop.

After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors 


                    Nathan Hanson

Member since: 04/08/2014

570 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 8-11, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 8-11, Regan Spring 2014 



                    CPSU-REGAN-S14S8G11                     


                                            4 Members                     


                                            9 Guides authored