Difficulty
Easy
Steps
13
Time Required
5 minutes
Sections
3
- Battery
- 5 steps
- Back Cover Panel
- 4 steps
- RAM
- 4 steps
Flags
0
BackAcer Aspire 5253
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop over.
Turn the laptop over.
1024
Step 2
- “Unlock” your battery by moving the switch as shown so that an unlocked lock on a red background is shown.
“Unlock” your battery by moving the switch as shown so that an unlocked lock on a red background is shown.
Step 3
- Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop.
Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop.
Step 4
- Now remove the battery by lifting it out of the laptop by the side closest to the switches.
Now remove the battery by lifting it out of the laptop by the side closest to the switches.
Step 5
- You have successfully removed the battery. Congratulations!
You have successfully removed the battery. Congratulations!
Step 6
Back Cover Panel
- Now, locate the two screws that hold the back cover panel onto the laptop.
Now, locate the two screws that hold the back cover panel onto the laptop.
Step 7
- Unscrew both of the screws that are holding the back panel in place with the Philips #00 head.
- The screws are 3/8" in length and have a 1/4" head.
Unscrew both of the screws that are holding the back panel in place with the Philips #00 head.
The screws are 3/8" in length and have a 1/4" head.
Step 8
- Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there.
Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there.
Step 9
- After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop.
After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop.
Step 10
RAM
- Now, locate the RAM.
Now, locate the RAM.
Step 11
- Locate the two metal pieces on both sides of the RAM that are holding it in place.
Locate the two metal pieces on both sides of the RAM that are holding it in place.
Step 12
- Pull the tabs apart to remove the RAM.
- The RAM will pop up once they are pried open.
Pull the tabs apart to remove the RAM.
The RAM will pop up once they are pried open.
Step 13
- Carefully slide the RAM out of the compartment.
Carefully slide the RAM out of the compartment.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Cynthia Barajas
Member since: 04/08/2014
2,141 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 8-11, Regan Spring 2014
Member of Cal Poly, Team 8-11, Regan Spring 2014
CPSU-REGAN-S14S8G11
4 Members
9 Guides authored
nhanblack1996 - Mar 26, 2016
Reply
which bus-ram acer 5253 can use? i know it use bus 1066 but i don’t know with bus 1666 how is machine active?
