Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Assembly
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAcer Aspire 5315

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Assemble the keyboard
  • To mount the keyboard, put the keypad and press until it clicks

To mount the keyboard, put the keypad and press until it clicks

1024

Step 2

              Mount the network card
  • To mount the network card, we have to put it diagonally if it can not be broken.
  • When it is already on, it is only necessary to adjust the screw.
  • To connect the two cables we have to put it on their sites and press until one click.

To mount the network card, we have to put it diagonally if it can not be broken.

When it is already on, it is only necessary to adjust the screw.

To connect the two cables we have to put it on their sites and press until one click.

Step 3

              Mount the processor
  • To mount the processor, what we have to do is put it straight, if the pins break, it will no longer work.
  • When it is well placed, we only have to adjust the screw until it is well fixed.

To mount the processor, what we have to do is put it straight, if the pins break, it will no longer work.

When it is well placed, we only have to adjust the screw until it is well fixed.

Step 4

              Mount the heat sink
  • To mount the heatsink, we have to take good care of it, and if the processor could not be reheated, it would be wrong.
  • When it is well put put the four screws to fix it.
  • Set the heatsink to the fan.

To mount the heatsink, we have to take good care of it, and if the processor could not be reheated, it would be wrong.

When it is well put put the four screws to fix it.

Set the heatsink to the fan.

Step 5

              Mount the fan
  • When it is already cleaned, we return the four screws to it so that it does not open.
  • Then we place it in its place on the motherboard and fix it.
  • We do not forget to connect the cable.

When it is already cleaned, we return the four screws to it so that it does not open.

Then we place it in its place on the motherboard and fix it.

We do not forget to connect the cable.

Step 6

              Put RAM memory
  • To place the RAM we have to be careful that it can also be broken as the network card
  • We have to put it diagonally so it does not break.

To place the RAM we have to be careful that it can also be broken as the network card

We have to put it diagonally so it does not break.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

arun bhusal

Mariana Roca

Corey Meyer

Luis Villalpando

Author

                                      with 1 other contributor 


                    Carlos Ibañez

Member since: 05/08/2017

231 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge