Difficulty
Moderate
Steps
10
Time Required
15 - 20 minutes
Sections
2
- Battery
- 4 steps
- Screen
- 6 steps
Flags
0
BackAcer Aspire 5334-2581
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Please make sure your device is unplugged . Turn it over slowly, and place it on a flat surface.
Please make sure your device is unplugged . Turn it over slowly, and place it on a flat surface.
1024
Step 2
- This latch holds your battery in place, it should always be locked. Make sure to unlock this piece.
- Do not break this latch, otherwise your battery will not hold in place.
This latch holds your battery in place, it should always be locked. Make sure to unlock this piece.
Do not break this latch, otherwise your battery will not hold in place.
Step 3
- Locate the eject latch and push it so the battery can come out.
- The battery will lift up once you have pushed the latch.
- You DO NOT need to adjust the latch when replacing the new battery, because it just snaps in place.
Locate the eject latch and push it so the battery can come out.
The battery will lift up once you have pushed the latch.
You DO NOT need to adjust the latch when replacing the new battery, because it just snaps in place.
Step 4
- Lift the battery up, and it should just come right off. You should see the label with the part number.
Lift the battery up, and it should just come right off. You should see the label with the part number.
Step 5
Screen
- Remove the 4 rubber supports from the screen. Then remove the screws underneath.
Remove the 4 rubber supports from the screen. Then remove the screws underneath.
Step 6
- With a spudger, release the clips that hold the plastic frame to the back cover.
- Be careful while handling the bottom, there are cable connections, and you don’t want to damage them
With a spudger, release the clips that hold the plastic frame to the back cover.
Be careful while handling the bottom, there are cable connections, and you don’t want to damage them
Step 7
- With caution disconnect the camera cable.
With caution disconnect the camera cable.
Step 8
- Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame
Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame
Step 9
- Take the screen and flip on top of the keyboard.
- Unplug the cable connected to the video card.
- Don’t use too much force, you don’t want to damage this component.
Take the screen and flip on top of the keyboard.
Unplug the cable connected to the video card.
Don’t use too much force, you don’t want to damage this component.
Step 10
- Remove the tape, and unplug the display cable.
- Unstick the cable from the back of the LCD, and now the LCD is free to come off. You are ready to install a new one
- Try not to damage this cable, otherwise replacing it would be so much pain.
Remove the tape, and unplug the display cable.
Unstick the cable from the back of the LCD, and now the LCD is free to come off. You are ready to install a new one
Try not to damage this cable, otherwise replacing it would be so much pain.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
gilson teixeira
Member since: 10/20/2016
334 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
UMass Dartmouth, Team 1-2, Catania Fall 2016
Member of UMass Dartmouth, Team 1-2, Catania Fall 2016
UMASSD-CATANIA-F16S1G2
3 Members
5 Guides authored
