Acer Aspire 5534 1146 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes - 1 hour

Sections

Screen
6 steps

Flags

BackAcer Aspire 5534-1146
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

Use the blue spudger to remove the 4 rubber supports from each corner of the screen.
After use a PH0 screw bit to remove the corresponding screws underneath.

Use the blue spudger to remove the 4 rubber supports from each corner of the screen.

After use a PH0 screw bit to remove the corresponding screws underneath.

1024

Step 2

Use a plastic opening tool to carefully release the plastic clips that hold the plastic frame to the back cover.
Be careful while handling the bottom, there are cable connections and you don’t want to damage them.

Use a plastic opening tool to carefully release the plastic clips that hold the plastic frame to the back cover.

Be careful while handling the bottom, there are cable connections and you don’t want to damage them.

Step 3

Gently disconnect the camera cable.

Gently disconnect the camera cable.

Step 4

Remove the 4 screws in the corners underneath the plastic frame that was removed. Screen should then be able to come of the frame.

Remove the 4 screws in the corners underneath the plastic frame that was removed. Screen should then be able to come of the frame.

Step 5

Take the screen lay it face down on top of the keyboard.
Unplug the cable that is connected to the video card.
This cable may be taped down to the back of the screen, if necessary lift the tape gently.

Take the screen lay it face down on top of the keyboard.

Unplug the cable that is connected to the video card.

This cable may be taped down to the back of the screen, if necessary lift the tape gently.

Step 6

Remove the tape, and unplug the display cable on the back of the screen.
Pull the tape off of the cable from the back of the screen, and now the screen should be free to come off. You are now ready to install a new one.

Remove the tape, and unplug the display cable on the back of the screen.

Pull the tape off of the cable from the back of the screen, and now the screen should be free to come off. You are now ready to install a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Trysten buckley

Member since: 10/09/2018

337 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Eastern Washington University, Team S2-G5, Munoz Fall 2018                        

                                                  Member of Eastern Washington University, Team S2-G5, Munoz Fall 2018 



                    EWU-MUNOZ-F18S2G5                     


                                            5 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team