Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • Display
  • 10 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAcer Aspire 5536

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Display
  • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

Remove the 4 rubber supports from the screen. Then remove the screws underneath.

1024

Step 2

  • With a spudger, release the clips that hold the plastic frame to the back cover.
  • Be careful while handling the bottom part, specially with the hinges, as there are cables inside.

With a spudger, release the clips that hold the plastic frame to the back cover.

Be careful while handling the bottom part, specially with the hinges, as there are cables inside.

Step 3

  • When all the clips are out, the entire plastic frame should come out easily.

When all the clips are out, the entire plastic frame should come out easily.

Step 4

  • Carefully disconnect the camera cable.

Carefully disconnect the camera cable.

Step 5

  • Remove the 4 screws located in the sides of the LCD screen.

Remove the 4 screws located in the sides of the LCD screen.

Step 6

  • Remove the other 4 screws that secure the metal LCD frame to the hinges.

Remove the other 4 screws that secure the metal LCD frame to the hinges.

Step 7

  • Take the LCD screen out of the metal frame and flip it towards the keyboard.

Take the LCD screen out of the metal frame and flip it towards the keyboard.

Step 8

  • Remove the tape that holds the display cable.
  • Be careful not to take the entire tape away, as this may cause severe damage to the cable.

Remove the tape that holds the display cable.

Be careful not to take the entire tape away, as this may cause severe damage to the cable.

Step 9

  • Carefully disconnect the cable with a spuger.

Carefully disconnect the cable with a spuger.

Step 10

  • Unstick the cables from the back of the LCD screen.
  • The LCD should be completely free, so just take it out and install a new one.

Unstick the cables from the back of the LCD screen.

The LCD should be completely free, so just take it out and install a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 4 other contributors 


                    TechStem

Member since: 03/30/2010

461 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Law199 - Jun 15, 2014

Reply

Hi there.. I just bought a display for my aspire 5536 and it seems it has a different fitting for the cable.. in fact I bought an LED display and the original one was an LCD (there is an inverter fitted in the lid under the screen) ok.. my question.. Is that possible under any circumstances to fit this new LED screen in my laptop by changing the video cable with a proper one for this new screen??

Marcelo - Sep 14, 2015

Reply

Hi, thanks for the info. Can you tell me the part number of the LCD screen? thanks.