Difficulty
Moderate
Steps
13
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- Screen
- 10 steps
Flags
0
BackAcer Aspire 5734z-4836
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before removing the battery, power off your laptop and disconnect the AC adapter.
- Flip your laptop on its back so the battery is facing up and the hinges are facing away from you.
Before removing the battery, power off your laptop and disconnect the AC adapter.
Flip your laptop on its back so the battery is facing up and the hinges are facing away from you.
1024
Step 2
- Slide the right latch down to unlock the battery.
Slide the right latch down to unlock the battery.
Step 3
- Slide and hold the left latch below the battery.
- While holding this latch in place, pry the battery up from its bottom edge.
- Lift the old battery out of its compartment.
Slide and hold the left latch below the battery.
While holding this latch in place, pry the battery up from its bottom edge.
Lift the old battery out of its compartment.
Step 4
Screen
- Remove rubber bumpers from each four corners to expose the hidden screws that hold the screen bezel in place.
Remove rubber bumpers from each four corners to expose the hidden screws that hold the screen bezel in place.
Step 5
- Extract the hidden screws from each of the bezel’s four corners, using a #00 Phillips screwdriver.
Extract the hidden screws from each of the bezel’s four corners, using a #00 Phillips screwdriver.
Step 6
- Pop the bezel loose along the edges with a plastic opening tool.
Pop the bezel loose along the edges with a plastic opening tool.
Step 7
- Gently pry off the bezel by holding each edge of the bezel with a forefinger and applying pressure onto the screen with your thumbs.
- Lift the bezel away completely.
Gently pry off the bezel by holding each edge of the bezel with a forefinger and applying pressure onto the screen with your thumbs.
Lift the bezel away completely.
Step 8
- Unscrew the middle screw on the green strip under the screen.
Unscrew the middle screw on the green strip under the screen.
Step 9
- Gently detach the red-and-white cable from the right end of the green strip under the screen.
Gently detach the red-and-white cable from the right end of the green strip under the screen.
Step 10
- Locate six small screws, three on each side of the screen.
- Remove all six screws with a #000 Phillips screwdriver.
Locate six small screws, three on each side of the screen.
Remove all six screws with a #000 Phillips screwdriver.
Step 11
- Disconnect wires from the webcam located above the screen.
Disconnect wires from the webcam located above the screen.
Step 12
- Lift the screen up from the laptop and turn it around.
- Gently peel back the tape located behind the screen.
Lift the screen up from the laptop and turn it around.
Gently peel back the tape located behind the screen.
Step 13
- Pull the connector straight down to remove it.
- You can now safely lift the screen out of the laptop.
Pull the connector straight down to remove it.
You can now safely lift the screen out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Susan Cao
Member since: 09/12/2016
121 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
CSU Fullerton, Team 2-3, Bruce Fall 2016
Member of CSU Fullerton, Team 2-3, Bruce Fall 2016
CSUF-BRUCE-F16S2G3
4 Members
6 Guides authored
