Difficulty
Moderate
Steps
15
Time Required
15 - 20 minutes
Sections
5
- Prepare Acer Aspire 5740-5780 for Disassembly
- 4 steps
- Battery
- 3 steps
- Back Cover
- 2 steps
- Hard Drive
- 3 steps
- WLAN Module
- 3 steps
Flags
1
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
BackAcer Aspire 5740-5780
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Prepare Acer Aspire 5740-5780 for Disassembly
- Turn the laptop off and remove the power cord.
Turn the laptop off and remove the power cord.
1024
Step 2
- Press in the SD Card or the SD Card Dummy if no SD Card is there. Remove card when it pops out.
Press in the SD Card or the SD Card Dummy if no SD Card is there. Remove card when it pops out.
Step 3
- Flip the laptop over on its face, so that the back is showing.
Flip the laptop over on its face, so that the back is showing.
Step 4
- Put grounding strap on one of your wrists and attach the other end to a large metal object (recommended method).
- If you don’t have a grounding strap an alternative approach is to touch a metal object that is either large or connected to the earth. Then avoid doing things that would accumulate static electricity on your body.
- Touching the internals of your device while you aren’t grounded could destroy your laptop.
Put grounding strap on one of your wrists and attach the other end to a large metal object (recommended method).
If you don’t have a grounding strap an alternative approach is to touch a metal object that is either large or connected to the earth. Then avoid doing things that would accumulate static electricity on your body.
Touching the internals of your device while you aren’t grounded could destroy your laptop.
Step 5
Battery
- Unlock the battery by flipping a switch near the release latch.
Unlock the battery by flipping a switch near the release latch.
Step 6
- Slide the release latch to the left to release the battery from the PC.
Slide the release latch to the left to release the battery from the PC.
Step 7
- Use your hands to pry the battery free of the computer.
Use your hands to pry the battery free of the computer.
Step 8
Back Cover
- Unscrew the 2 captive screws and 3 M2.5 x L8 screws holding back cover in place.
Unscrew the 2 captive screws and 3 M2.5 x L8 screws holding back cover in place.
Step 9
- Use spudger to pry open the back panel.
- Then lift panel off of the computer.
Use spudger to pry open the back panel.
Then lift panel off of the computer.
Step 10
Hard Drive
- Remove the one M2 x L4 screw that secures the hard drive in place.
- Screw not shown in picture.
Remove the one M2 x L4 screw that secures the hard drive in place.
Screw not shown in picture.
Step 11
- Using an opening tool or your hands, slide the hard drive out of its connector.
Using an opening tool or your hands, slide the hard drive out of its connector.
Step 12
- Lift the hard drive out of the computer.
Lift the hard drive out of the computer.
Step 13
WLAN Module
- Disconnect the black and white antenna cables from the module.
- Cables not shown.
Disconnect the black and white antenna cables from the module.
Cables not shown.
Step 14
- Remove one M2 x L4 screw, which is securing the WLAN Module.
Remove one M2 x L4 screw, which is securing the WLAN Module.
Step 15
- Carefully remove the module from the system, using plastic opening tools.
Carefully remove the module from the system, using plastic opening tools.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Gian Farrell
Member since: 03/20/2018
627 Reputation
6 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S3-G6, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G6, Peak Spring 2018
UMASSD-PEAK-S18S3G6
3 Members
9 Guides authored
