Difficulty
Difficult
Steps
8
Time Required
15 minutes
Sections
2
- Battery
- 3 steps
- Hard Drive
- 5 steps
Flags
0
BackAcer Aspire 5740-6378
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the locking switch into the unlocked position to ready the battery for removal.
Slide the locking switch into the unlocked position to ready the battery for removal.
1024
Step 2
- Slide the release latch until the battery pops out.
Slide the release latch until the battery pops out.
Step 3
- Remove the battery now that it’s been unsecured.
Remove the battery now that it’s been unsecured.
Step 4
Hard Drive
- Flip over the device so the back is facing upward.
Flip over the device so the back is facing upward.
Step 5
- Remove the five 8.7mm Phillips #0 screws securing the back panel.
Remove the five 8.7mm Phillips #0 screws securing the back panel.
Step 6
- Remove the back panel using a spudger or other similar tool to lever it open to reveal the hard drive and other internal components.
Remove the back panel using a spudger or other similar tool to lever it open to reveal the hard drive and other internal components.
Step 7
- Remove the single 3mm Phillips #0 screw that is holding the hard drive in place.
Remove the single 3mm Phillips #0 screw that is holding the hard drive in place.
Step 8
- Slide the hard drive away from the connector, then lift it to remove the drive.
Slide the hard drive away from the connector, then lift it to remove the drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ian Rodriguez
Member since: 03/20/2019
734 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S2-G5, Bailey Spring 2019
Member of UMass Dartmouth, Team S2-G5, Bailey Spring 2019
UMASSD-BAILEY-S19S2G5
3 Members
5 Guides authored
