Difficulty
Moderate
Steps
6
Time Required
15 minutes
Sections
1
- WIFI Chipset
- 6 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackAcer Aspire 5741
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
WIFI Chipset
- Begin on the back side of your laptop, locate these two screws then remove them with the JIS #0 driver bit.
Begin on the back side of your laptop, locate these two screws then remove them with the JIS #0 driver bit.
1024
Step 2
- Once screws are removed you can pry up the panel to reveal some of your computers components.
Once screws are removed you can pry up the panel to reveal some of your computers components.
Step 3
- Locate your computers WIFI chip; it will have black and white wires attached to it.
Locate your computers WIFI chip; it will have black and white wires attached to it.
Step 4
- Using your fingers or a spudger, remove the black and white cables from the chip, at the connector.
Using your fingers or a spudger, remove the black and white cables from the chip, at the connector.
Step 5
- Using the same JIS#0 screw driver remove the single small 1/4 inch long screw.
Using the same JIS#0 screw driver remove the single small 1/4 inch long screw.
Step 6
- Now that the chip is released just gently remove it from its connector seat.
Now that the chip is released just gently remove it from its connector seat.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Alex Imbery
Member since: 01/24/2019
133 Reputation
1 Guide authored
Badges:
2
Team
Cal Poly, Team S18-G6, White Winter 2019
Member of Cal Poly, Team S18-G6, White Winter 2019
CPSU-WHITE-W19S18G6
4 Members
5 Guides authored