Difficulty
Easy
Steps
5
Time Required
                          5 minutes            
Sections
3
- Battery
- 1 step
- Cover Panel
- 2 steps
- CMOS Battery
- 2 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
- BackAcer Aspire 5742 
- Full Screen 
- Options 
- History 
- Save to Favorites 
- Download PDF 
- Edit 
- Translate 
- Get Shareable Link 
- Embed This Guide 
- Notify Me of Changes 
- Stop Notifications 
Introduction
What you need
Step 1
              Battery               
- Move the battery catch to the “unlocked” position.
- Pull back the second spring-loaded battery catch until the battery pops up.
- Remove the battery.
Move the battery catch to the “unlocked” position.
Pull back the second spring-loaded battery catch until the battery pops up.
Remove the battery.
1024
Step 2
              Cover Panel               
- Turn the notebook around to face you.
- There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws.
Turn the notebook around to face you.
There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws.
Step 3
- Use a spudger to release the panel from the plastic retaining clips keeping it in place.
- Do not apply too much force, or you may break the clips.
- Remove the panel and set it aside.
Use a spudger to release the panel from the plastic retaining clips keeping it in place.
Do not apply too much force, or you may break the clips.
Remove the panel and set it aside.
Step 4
              CMOS Battery               
- After removing the cover panel, you will see the hard drive, the RAM, and the CMOS battery.
- The CMOS battery is the silver coin-like object in the center.
After removing the cover panel, you will see the hard drive, the RAM, and the CMOS battery.
The CMOS battery is the silver coin-like object in the center.
Step 5
- Press the tip of the spudger underneath the CMOS battery with very slight force.
- Press down on the opposite side of the battery while prying the battery upward with the spudger.
- After the battery is mostly lifted from the slot, you may pull out the battery with your fingers.
Press the tip of the spudger underneath the CMOS battery with very slight force.
Press down on the opposite side of the battery while prying the battery upward with the spudger.
After the battery is mostly lifted from the slot, you may pull out the battery with your fingers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
                                                                                      8 other people completed this guide.                                             
Author
                                      with 3 other contributors 
                    Bill Murray                     
Member since: 10/24/2016
576 Reputation
                                      2 Guides authored                  
                       Badges:
                       12
                                                        +9 more badges                           
Team
                       UMass Dartmouth, Team 2-6, Isaacson Fall 2016                        
                                                  Member of UMass Dartmouth, Team 2-6, Isaacson Fall 2016 
                    UMASSD-ISAACSON-F16S2G6                     
                                            3 Members                     
                                            5 Guides authored                     
satya venkata vara prasad - Dec 17, 2022
Reply
the best tueture