Difficulty

Difficult

Steps

12

Time Required

                          1 hour

Sections

3

  • Battery Replacement
  • 3 steps
  • Hard Drive
  • 4 steps
  • Motherboard
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAcer Aspire 5750-6677

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Replacement
  • Flip the laptop over.

Flip the laptop over.

1024

Step 2

  • Place a screw driver in the orange tab then slide to the right.

Place a screw driver in the orange tab then slide to the right.

Step 3

  • Lift and remove the battery.

Lift and remove the battery.

Step 4

              Hard Drive
  • Flip the device over so the backside is facing up.
  • Remove the two screws with the Phillips #0 screwdriver.

Flip the device over so the backside is facing up.

Remove the two screws with the Phillips #0 screwdriver.

Step 5

  • Remove the cover to access the hard drive.

Remove the cover to access the hard drive.

Step 6

  • Using the Phillips #0, remove the two screws holding the hard drive in.

Using the Phillips #0, remove the two screws holding the hard drive in.

Step 7

  • Pull the tab and lift up to remove the hard drive.

Pull the tab and lift up to remove the hard drive.

Step 8

              Motherboard
  • Start by flipping the device over to expose the screws.
  • Remove ten screws with the Phillips #0 screwdriver.

Start by flipping the device over to expose the screws.

Remove ten screws with the Phillips #0 screwdriver.

Step 9

  • Using a Phillips #0 screwdriver, remove the four screws found under the battery.

Using a Phillips #0 screwdriver, remove the four screws found under the battery.

Step 10

  • Flip the laptop back around so the Acer logo is facing upwards.
  • Open the laptop and using the iFixit opening tool, press the tabs in at the very top of the keyboard, in order to remove the keyboard.

Flip the laptop back around so the Acer logo is facing upwards.

Open the laptop and using the iFixit opening tool, press the tabs in at the very top of the keyboard, in order to remove the keyboard.

Step 11

  • Use the Phillips #0 screwdriver to remove six screws.
  • Pull the top off of the keyboard to expose the motherboard.

Use the Phillips #0 screwdriver to remove six screws.

Pull the top off of the keyboard to expose the motherboard.

Step 12

  • Remove the seven screws using the Phillips #0 screwdriver.
  • Detach any wires or cables that are attached to the motherboard.
  • Remove the motherboard.

Remove the seven screws using the Phillips #0 screwdriver.

Detach any wires or cables that are attached to the motherboard.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Dean Smith

Member since: 11/01/2019

207 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S1-G3, Valliere Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G3, Valliere Fall 2019 



                    UMASSD-VALLIERE-F19S1G3                     


                                            4 Members                     


                                            3 Guides authored