Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 4 steps
  • Speakers
  • 4 steps

Flags

0

  • BackAcer Aspire 6530-6522

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the device is unplugged and completely powered down.
  • Turn the device over.

Make sure the device is unplugged and completely powered down.

Turn the device over.

1024

Step 2

  • The lock switch can slide either towards or away from the battery. If it is pushed towards the battery, the release switch is locked and the battery can not be released.
  • Slide the switch away from the battery.

The lock switch can slide either towards or away from the battery. If it is pushed towards the battery, the release switch is locked and the battery can not be released.

Slide the switch away from the battery.

Step 3

  • The battery release switch is just to the inside of the battery and slides parallel to it.
  • Push the switch to the side. It is not just an open or close switch, it actually pops the battery up so you will feel some resistance.
  • When inserting a battery back into the device, you do not need to touch this switch. Just press the battery firmly down, you will see and hear this switch catch.

The battery release switch is just to the inside of the battery and slides parallel to it.

Push the switch to the side. It is not just an open or close switch, it actually pops the battery up so you will feel some resistance.

When inserting a battery back into the device, you do not need to touch this switch. Just press the battery firmly down, you will see and hear this switch catch.

Step 4

  • Pull the battery up and out. Use a plastic opening tool if necessary.

Pull the battery up and out. Use a plastic opening tool if necessary.

Step 5

              Speakers
  • Remove the three 3.5mm screws securing the subwoofer using the Phillips #1 screwdriver.
  • Remove the two 4.5mm screws securing the speakers on either end.

Remove the three 3.5mm screws securing the subwoofer using the Phillips #1 screwdriver.

Remove the two 4.5mm screws securing the speakers on either end.

Step 6

  • Disconnect the speaker wire.

Disconnect the speaker wire.

Step 7

  • Lift the subwoofer from the right side and turn it over to the left.
  • Do not try to pull it all the way out, it is still connected by cables.

Lift the subwoofer from the right side and turn it over to the left.

Do not try to pull it all the way out, it is still connected by cables.

Step 8

  • Lift the speaker from the right side and remove from device.

Lift the speaker from the right side and remove from device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Patrick McKenna

Member since: 03/20/2018

656 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team S5-G6, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G6, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G6                     


                                            3 Members                     


                                            8 Guides authored