Difficulty
Difficult
Steps
11
Time Required
45 minutes - 1 hour
Sections
2
- Acer Aspire 7736Z-4809 Repair Preparation
- 2 steps
- Keyboard
- 9 steps
Flags
0
BackAcer Aspire 7736Z-4809
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Acer Aspire 7736Z-4809 Repair Preparation
- Unplug and power off the laptop.
- If the battery is still connected to the laptop, remove the battery.
Unplug and power off the laptop.
If the battery is still connected to the laptop, remove the battery.
1024
Step 2
- Flip over the laptop so that the back panel of the laptop is facing up.
Flip over the laptop so that the back panel of the laptop is facing up.
Step 3
Keyboard
- Use the Phillips #1 screwdriver to remove the three 4.5mm Phillips #1 screws.
Use the Phillips #1 screwdriver to remove the three 4.5mm Phillips #1 screws.
Step 4
- Orient the laptop so that the hinges between the LCD module and the laptop’s bottom base are visible.
- Use the plastic opening tools to separate the speaker panel from the laptop.
Orient the laptop so that the hinges between the LCD module and the laptop’s bottom base are visible.
Use the plastic opening tools to separate the speaker panel from the laptop.
Step 5
- Flip over the LCD module of the laptop.
- Use the plastic opening tools to separate the speaker panel from the laptop.
- Insert the opening tool into the crack between the panel and the frame at either end. Slide the opening tool across the line. Reinsert the opening tool into the crack and apply leverage until the frame releases.
- Repeat this step with the other side of the laptop.
Flip over the LCD module of the laptop.
Insert the opening tool into the crack between the panel and the frame at either end. Slide the opening tool across the line. Reinsert the opening tool into the crack and apply leverage until the frame releases.
Repeat this step with the other side of the laptop.
Step 6
- Gently hold the speaker panel by the sides and pull upwards to release the panel.
Gently hold the speaker panel by the sides and pull upwards to release the panel.
Step 7
- Use the flat end of the medium sized metal spudger tool to release the two tabs at the top of the keyboard.
- Do not remove the keyboard yet.
Use the flat end of the medium sized metal spudger tool to release the two tabs at the top of the keyboard.
Do not remove the keyboard yet.
Step 8
- Insert a finger into the opening above the F11 key and pry the keyboard until it is released from the casing.
Insert a finger into the opening above the F11 key and pry the keyboard until it is released from the casing.
Step 9
- Gently raise the keyboard with your hands.
Gently raise the keyboard with your hands.
Step 10
- Lift the black latch upwards to release the ZIF connector.
Lift the black latch upwards to release the ZIF connector.
Step 11
- Remove the keyboard from the keyboard slot.
Remove the keyboard from the keyboard slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Pnithan Jantarakolica
Member since: 09/22/2016
1,132 Reputation
10 Guides authored
Badges:
10
+7 more badges
Team
UC Davis, Team 2-4, Oliver Fall 2016
Member of UC Davis, Team 2-4, Oliver Fall 2016
UCD-OLIVER-F16S2G4
5 Members
10 Guides authored
