Difficulty
Easy
Steps
2
Time Required
10 minutes
Sections
1
- Wireless Card
- 2 steps
Flags
0
BackAcer Aspire 7741Z-4643
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless Card
- Begin by unscrewing the four phillips #0 7.5mm screws on the plate on the underside. Remove the plate by lifting up.
Begin by unscrewing the four phillips #0 7.5mm screws on the plate on the underside. Remove the plate by lifting up.
1024
Step 2
- Unscrew the one phillips #0 4.0mm screw at the top of the card in order for it to be removed.
- After the screw is removed, slide the card out. Remove connections to the terminals by pulling up on the connection carefully.
Unscrew the one phillips #0 4.0mm screw at the top of the card in order for it to be removed.
After the screw is removed, slide the card out. Remove connections to the terminals by pulling up on the connection carefully.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Philip Matena
Member since: 10/23/2018
95 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UC Davis, Team S11-G4, Lore Fall 2018
Member of UC Davis, Team S11-G4, Lore Fall 2018
UCD-LORE-F18S11G4
4 Members
4 Guides authored
