Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes

Sections

2

  • Battery
  • 4 steps
  • LCD Panel & Faceplate
  • 5 steps

Flags

0

  • BackAcer Aspire E1-470

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off the laptop and disconnect all device cords.

Turn off the laptop and disconnect all device cords.

1024

Step 2

  • Flip the laptop over so the bottom is facing you.

Flip the laptop over so the bottom is facing you.

Step 3

  • Use your finger or a spuger to pull the battery release switch.

Use your finger or a spuger to pull the battery release switch.

Step 4

  • Remove the battery from the laptop.

Remove the battery from the laptop.

Step 5

              LCD Panel & Faceplate
  • Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

Step 6

  • On both corners, use tweezers to remove small plastic sticker hiding the screws.
  • Remove screws using Phillips #0 screwdriver.

On both corners, use tweezers to remove small plastic sticker hiding the screws.

Remove screws using Phillips #0 screwdriver.

Step 7

  • Turn the laptop over and open it up.
  • Using a prying tool, run along all edges of the display to pry the front face plate from the cover.
  • Use your fingers to pull the LCD panel and faceplate from the backing.

Turn the laptop over and open it up.

Using a prying tool, run along all edges of the display to pry the front face plate from the cover.

Use your fingers to pull the LCD panel and faceplate from the backing.

Step 8

  • LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.
  • Carefully peel tape away from cable lead and separate cable from LCD panel.

LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.

Carefully peel tape away from cable lead and separate cable from LCD panel.

Step 9

  • Remove the LCD Panel and faceplate from the device.

Remove the LCD Panel and faceplate from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Joel Humes

Member since: 10/22/2018

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UC Davis, Team S4-G5, Lore Fall 2018                        

                                                  Member of UC Davis, Team S4-G5, Lore Fall 2018 



                    UCD-LORE-F18S4G5                     


                                            3 Members                     


                                            5 Guides authored