Difficulty
Moderate
Steps
9
Time Required
7 minutes
Sections
2
- Battery
- 2 steps
- Touch Screen Display
- 7 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackAcer Aspire E1-510P-4637
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- To release the battery, depress the battery release with a nylon spudger. Hold the latch down and slide it over.
To release the battery, depress the battery release with a nylon spudger. Hold the latch down and slide it over.
1024
Step 2
- Firmly grab hold of the battery and slide it out of the laptop.
Firmly grab hold of the battery and slide it out of the laptop.
Step 3
Touch Screen Display
- Remove the plastic screw covers located near the laptop’s hinge using a metal spudger.
- Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver.
Remove the plastic screw covers located near the laptop’s hinge using a metal spudger.
Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver.
Step 4
- Flip the laptop over and open it up so the screen is facing up and the top of the screen is facing you.
- Use a plastic opening tool to separate the the touchscreen from the back cover.
- Carefully work your way around the frame and gently pry. Be careful not to brake the frame or damage the screen.
Flip the laptop over and open it up so the screen is facing up and the top of the screen is facing you.
Use a plastic opening tool to separate the the touchscreen from the back cover.
Carefully work your way around the frame and gently pry. Be careful not to brake the frame or damage the screen.
Step 5
- Disconnect the display cable by first taking off the tape using a metal spudger and then pulling on the black tab.
Disconnect the display cable by first taking off the tape using a metal spudger and then pulling on the black tab.
Step 6
- Take off the yellow tape connecting the display to the border.
Take off the yellow tape connecting the display to the border.
Step 7
- Pull back the adhesive using the metal spudger.
- Pry out the camera by lifting the adhesive with the metal spudger. Then, remove the camera by lifting it up by one side.
Pull back the adhesive using the metal spudger.
Pry out the camera by lifting the adhesive with the metal spudger. Then, remove the camera by lifting it up by one side.
Step 8
- Remove the two brackets holding the displays by unscrewing both M1 .6x3 screws with a PH0 Phillips screwdriver.
Remove the two brackets holding the displays by unscrewing both M1 .6x3 screws with a PH0 Phillips screwdriver.
Step 9
- Release the display from the border using your hands.
Release the display from the border using your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Caleb lindsay
Member since: 04/11/2016
778 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 34-15, Maness Spring 2016
Member of Cal Poly, Team 34-15, Maness Spring 2016
CPSU-MANESS-S16S34G15
4 Members
6 Guides authored
Chris Foliaki - Aug 18, 2017
Reply
the touchscreen its glue together with the LCD?
