Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- RAM
- 2 steps
Flags
0
BackAcer Aspire E1-532
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Use a Phillips screwdriver to remove the CM2.5*3 screw on the shown cover.
- Lift and remove the cover from the end that had the holdinging screw.
- Lifting the plastic cover will require some pressure.
Use a Phillips screwdriver to remove the CM2.5*3 screw on the shown cover.
Lift and remove the cover from the end that had the holdinging screw.
Lifting the plastic cover will require some pressure.
1024
Step 2
- Push out the tabs on the other side of the RAM stick.
- The RAM stick should raise up when the tabs are depressed.
- Pull the RAM stick out
- When replacing, make sure to line up the inserts.
Push out the tabs on the other side of the RAM stick.
The RAM stick should raise up when the tabs are depressed.
Pull the RAM stick out
When replacing, make sure to line up the inserts.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
John Alberts
Member since: 09/25/2017
241 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S3-G5, Thompson Fall 2017
Member of University of North Texas, Team S3-G5, Thompson Fall 2017
UNT-THOMPSON-F17S3G5
3 Members
3 Guides authored