Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- RAM
- 3 steps
Flags
0
BackACER Aspire E1-572
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before you begin, be sure to turn off your laptop and unplug it from the outlet.
- Flip your laptop over so the back panel is facing upwards.
- Locate the lock switch below the battery.
Before you begin, be sure to turn off your laptop and unplug it from the outlet.
Flip your laptop over so the back panel is facing upwards.
Locate the lock switch below the battery.
1024
Step 2
- Slide the lock switch to the right using your finger or a spudger.
- At the same time, grasp the battery with your other hand and slide it out of the laptop.
- Remove the battery.
- To reinsert or replace the battery, simply line up the tabs on the battery with the laptop and slide it straight back in. There is no need to move the lock switch.
Slide the lock switch to the right using your finger or a spudger.
At the same time, grasp the battery with your other hand and slide it out of the laptop.
Remove the battery.
To reinsert or replace the battery, simply line up the tabs on the battery with the laptop and slide it straight back in. There is no need to move the lock switch.
Step 3
RAM
- Unscrew the one 2.5 x 8mm Phillips #0 screw from the bottom panel as designated in the image.
Unscrew the one 2.5 x 8mm Phillips #0 screw from the bottom panel as designated in the image.
Step 4
- Remove the back panel by carefully disengaging it around the edges and then pull upwards.
Remove the back panel by carefully disengaging it around the edges and then pull upwards.
Step 5
- Disengage the metal tabs located on either side of the RAM stick by pulling the tabs outward.
- Carefully remove the RAM so you don’t damage the connectors.
Disengage the metal tabs located on either side of the RAM stick by pulling the tabs outward.
Carefully remove the RAM so you don’t damage the connectors.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Cody Lim
Member since: 01/25/2017
1,377 Reputation
7 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 9-6, Banghart Winter 2017
Member of Cal Poly, Team 9-6, Banghart Winter 2017
CPSU-BANGHART-W17S9G6
3 Members
7 Guides authored
