Difficulty

Moderate

Steps

6

Time Required

                          3 - 5 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackAcer Aspire E3-111-C0WA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the 13 indicated screws (6.2 mm) using a Phillips #1 screwdriver.

Remove the 13 indicated screws (6.2 mm) using a Phillips #1 screwdriver.

1024

Step 2

  • Insert your plastic opening tool between the bottom case and the rest of the laptop.
  • Using the plastic opening tool as a lever, apply downward pressure on the tool to lift the bottom up.
  • Make your way around the case with the tool, every so often applying downward pressure to lift the bottom up.
  • Lift the bottom off the laptop.

Insert your plastic opening tool between the bottom case and the rest of the laptop.

Using the plastic opening tool as a lever, apply downward pressure on the tool to lift the bottom up.

Make your way around the case with the tool, every so often applying downward pressure to lift the bottom up.

Lift the bottom off the laptop.

Step 3

  • Make sure you have properly grounded yourself to avoid potentially damaging any internal components by wearing the anti-static wrist strap and attaching the clip end to metal.
  • Press and hold the battery discharge button on the motherboard for 5 seconds to drain the battery.

Make sure you have properly grounded yourself to avoid potentially damaging any internal components by wearing the anti-static wrist strap and attaching the clip end to metal.

Press and hold the battery discharge button on the motherboard for 5 seconds to drain the battery.

Step 4

  • Dislodge the battery’s connector to the motherboard by using the plastic opening tool as a lever on the two small plastic tabs that stick out on either side of the connector.

Dislodge the battery’s connector to the motherboard by using the plastic opening tool as a lever on the two small plastic tabs that stick out on either side of the connector.

Step 5

  • Unscrew the two 6.2 mm Phillips #1 head screws on either side of the battery as indicated.

Unscrew the two 6.2 mm Phillips #1 head screws on either side of the battery as indicated.

Step 6

  • Lift the battery up and off the rest of the laptop.

Lift the battery up and off the rest of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Jackson Li

Member since: 10/17/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UC Santa Barbara, Team S1-G2, Weedon Fall 2017                        

                                                  Member of UC Santa Barbara, Team S1-G2, Weedon Fall 2017 



                    UCSB-WEEDON-F17S1G2                     


                                            5 Members                     


                                            5 Guides authored