Acer Aspire E5 471 5456 Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          2 - 5 minutes

Sections

Back Cover
3 steps
RAM
1 step

Flags

BackAcer Aspire E5-471-5456
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Carefully place the closed computer on a flat surface, with it oriented screen down.
Now you need to use the Phillips #0 Screwdriver to remove all 17 of the M2.5X8 mm screws. Use the red circles on the diagram to help you locate these screws.

Carefully place the closed computer on a flat surface, with it oriented screen down.

Now you need to use the Phillips #0 Screwdriver to remove all 17 of the M2.5X8 mm screws. Use the red circles on the diagram to help you locate these screws.

1024

Step 2

Use an opening tool to gently pry open the case.
Take extreme care when removing the case to not get the case stuck on any of the ports. Make sure that to evenly open the case and not pry one side open before the other to avoid damage.
Slowly peel the cover off and make sure there are no wires or clips still connecting the two pieces together. These pieces are extremely fragile so it is vital to take your time and only use light pressure.

Use an opening tool to gently pry open the case.

Take extreme care when removing the case to not get the case stuck on any of the ports. Make sure that to evenly open the case and not pry one side open before the other to avoid damage.

Slowly peel the cover off and make sure there are no wires or clips still connecting the two pieces together. These pieces are extremely fragile so it is vital to take your time and only use light pressure.

Step 3

Place cover and screws aside and you are now free to access the different components of this laptop.

Place cover and screws aside and you are now free to access the different components of this laptop.

Step 4

RAM

Locate the two RAM cards.
Each RAM card will be held in place by two clips located on the left and right sides of each card. Simply pop both clips out at the same time and remove the RAM with your hand.
Repeat the process with the second RAM card.
Be careful when removing to avoid bumping other parts.

Locate the two RAM cards.

Each RAM card will be held in place by two clips located on the left and right sides of each card. Simply pop both clips out at the same time and remove the RAM with your hand.

Repeat the process with the second RAM card.

Be careful when removing to avoid bumping other parts.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Daniel Gonzalez

Member since: 09/26/2017

364 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S6-G4, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S6-G4, Banghart Fall 2017 



                    CPSU-BANGHART-F17S6G4                     


                                            5 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team