Acer Aspire E5 571 58Cg Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          30 minutes            

Sections

2

• Battery
• 2 steps
• Keyboard
• 4 steps

Flags

0

• BackAcer Aspire E5-571-58CG

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Make sure the laptop is powered off.
• Flip the laptop over and locate the battery release switch.
• Insert the pointed end of the spudger into the battery release switch.
• Push the battery release switch to the right.

Make sure the laptop is powered off.

Flip the laptop over and locate the battery release switch.

Insert the pointed end of the spudger into the battery release switch.

Push the battery release switch to the right.

1024

Step 2

• While the battery release switch is pushed to the right, carefully slide the battery out of its socket.

While the battery release switch is pushed to the right, carefully slide the battery out of its socket.

Step 3

              Keyboard               

• Make sure laptop is upright.
• Pry the keyboard cover off with the plastic opening tool.

Make sure laptop is upright.

Pry the keyboard cover off with the plastic opening tool.

Step 4

• Flip the keyboard cover upside down.
• Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.

Flip the keyboard cover upside down.

Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.

Step 5

• Push the metal panel forward to unlock it from plastic holders on both sides.
• Lift the metal panel up and peel it back to expose the keyboard component.

Push the metal panel forward to unlock it from plastic holders on both sides.

Lift the metal panel up and peel it back to expose the keyboard component.

Step 6

• Use the metal spudger to lift the keyboard component out of the metal panel.

Use the metal spudger to lift the keyboard component out of the metal panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Matthew Barboza                     

Member since: 10/19/2018

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S7-G7, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S7-G7, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S7G7                     


                                            5 Members                     


                                            5 Guides authored