Acer Aspire E5 571 58Cg Touchpad Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          50 minutes            

Sections

2

• Keyboard
• 4 steps
• Touchpad
• 4 steps

Flags

0

• BackAcer Aspire E5-571-58CG

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Make sure laptop is upright.
• Pry the keyboard cover off with the plastic opening tool.

Make sure laptop is upright.

Pry the keyboard cover off with the plastic opening tool.

1024

Step 2

• Flip the keyboard cover upside down.
• Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.

Flip the keyboard cover upside down.

Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.

Step 3

• Push the metal panel forward to unlock it from plastic holders on both sides.
• Lift the metal panel up and peel it back to expose the keyboard component.

Push the metal panel forward to unlock it from plastic holders on both sides.

Lift the metal panel up and peel it back to expose the keyboard component.

Step 4

• Use the metal spudger to lift the keyboard component out of the metal panel.

Use the metal spudger to lift the keyboard component out of the metal panel.

Step 5

              Touchpad               

• Make sure you have removed the keyboard before attempting to remove the touchpad.
• Use a 1 1/2 mm flathead screw bit to remove the black screw at the bottom of the panel.

Make sure you have removed the keyboard before attempting to remove the touchpad.

Use a 1 1/2 mm flathead screw bit to remove the black screw at the bottom of the panel.

Step 6

• Peel back the marked strips with the metal spudger.

Peel back the marked strips with the metal spudger.

Step 7

• Use a 1 1/2 mm flathead screw bit to remove the two black screws at the top of the panel.

Use a 1 1/2 mm flathead screw bit to remove the two black screws at the top of the panel.

Step 8

• Lift the touch pad out of the metal panel with a metal spudger.

Lift the touch pad out of the metal panel with a metal spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Daniel Mello                     

Member since: 10/16/2018

258 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team S7-G7, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S7-G7, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S7G7                     


                                            5 Members                     


                                            5 Guides authored