Difficulty
Moderate
Steps
8
Time Required
35 - 55 minutes
Sections
3
- Battery
- 3 steps
- Keyboard
- 2 steps
- Hard Drive
- 3 steps
Flags
0
BackAcer Aspire E5-571P-55TL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide will explain how to replace the hard drive for the Acer E5-571P-55TL. Before performing actions in this guide be sure to power off your laptop and remove the power adapter.
What you need
Step 1
Battery
- Make sure that laptop is turned off.
- Turn the laptop upside down with the battery facing you.
Make sure that laptop is turned off.
Turn the laptop upside down with the battery facing you.
1024
Step 2
- Place the Spudger into the battery lock and slide it to the left until you hear the battery unlock.
Place the Spudger into the battery lock and slide it to the left until you hear the battery unlock.
Step 3
- Pull the battery towards you to remove it from the laptop.
Pull the battery towards you to remove it from the laptop.
Step 4
Keyboard
- Using a Phillips #0 screwdriver, remove each of the eighteen 8 mm screws from the bottom of the laptop.
Using a Phillips #0 screwdriver, remove each of the eighteen 8 mm screws from the bottom of the laptop.
Step 5
- Carefully place your fingers underneath the top of the keyboard just below the screen.
- Pull upwards until you can hear the keyboard click out of place.
- Continue around the entire laptop, carefully pulling the keyboard and palm rest assembly slightly from the frame to reveal the ribbon connectors.
- Don’t pull the keyboard off the frame yet because it’s attached by ribbon connectors.
- After the keyboard is detached, unplug each of the three ribbon cables and remove the keyboard and palm rest assembly.
Carefully place your fingers underneath the top of the keyboard just below the screen.
Pull upwards until you can hear the keyboard click out of place.
Continue around the entire laptop, carefully pulling the keyboard and palm rest assembly slightly from the frame to reveal the ribbon connectors.
Don’t pull the keyboard off the frame yet because it’s attached by ribbon connectors.
After the keyboard is detached, unplug each of the three ribbon cables and remove the keyboard and palm rest assembly.
Step 6
Hard Drive
- Using a Phillips #0 screwdriver, remove the two 8 mm screws holding the hard drive carriage in place.
Using a Phillips #0 screwdriver, remove the two 8 mm screws holding the hard drive carriage in place.
Step 7
- Carefully unplug the ribbon cable running across the hard drive carriage and place it to the side.
- Remove the hard drive by sliding it to your right, away from the motherboard, next pull the hard drive towards yourself and away from the laptop.
Carefully unplug the ribbon cable running across the hard drive carriage and place it to the side.
Remove the hard drive by sliding it to your right, away from the motherboard, next pull the hard drive towards yourself and away from the laptop.
Step 8
- Once again using a Phillips #0 screwdriver, remove the two 3 mm screws highlighted on each side of the hard drive case.
- Open the hard drive case to replace the hard drive.
Once again using a Phillips #0 screwdriver, remove the two 3 mm screws highlighted on each side of the hard drive case.
Open the hard drive case to replace the hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Zebediah Perkins
Member since: 03/27/2022
112 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team B-1, Gurgel Spring 2022
Member of UMass Dartmouth, Team B-1, Gurgel Spring 2022
UMASSD-GURGEL-S22SBG1
4 Members
6 Guides authored
